Used 5 square 8 square 10 square 15 square 20 square 50 square of 100 square 200 square not ..

Stainless steel condenser part of the heat is the heat transfer fluid to cold fluid devices, also known as heat exchangers. Widely used in chemical, petroleum, power and nuclear industries. Its main function is to ensure that the specific process temperature required for the media, but also one of the major equipment to improve energy efficiency. Stainless steel condenser can be either a stand-alone device, such as a heater, cooler and condenser, etc; also be part of a process equipment, such as ammonia synthesis tower heat exchangers. Due to limitations of the manufacturing process and scientific level, the early heat exchanger (condenser) only a simple structure, and a small heat transfer area, bulky and heavy, like a snake-tube heat exchanger. With the development of the manufacturing process, and gradually form a shell and tube heat exchanger, which not only has a larger unit volume heat transfer area, and the heat transfer effects are good, it has long been a typical change in industrial production heat. High efficiency cyclone known as the turbulent heat exchanger, dual profile of the heat exchanger tube, threaded pipe heat exchangers, spiral heat exchangers, spiral fluted tube heat exchanger. High efficiency cyclone heat exchanger is the introduction of advanced heat transfer technology, combined with our over-current on the basis of heat transfer equipment developed from an energy efficient heat transfer equipment. Efficient use of copper heat transfer components made of high thermal conductivity of combining internal and external thread, by the cyclone heat exchanger made of it, in the fluid resistance is not the case, they form a strong swirl, greatly improving the tube internal and external heat transfer coefficient. 2 Product Features 1. Heat factor: Tested in practical velocity (1.5-2.5 m / s) in the range, steam - water heat exchanger when the overall heat transfer coefficient: Q = 6000-7000 kcal / m2.hC, water - When water heat exchanger overall heat transfer coefficient: Q = 4000-5000 kcal / m2.hC. Products in the heat exchanger during heat than other goods 15-25% energy saving. 2. easy to scale: since the fluid is a spiral flow, the fluid under the action of centrifugal force on the wall there is a strong erosion effect, so easy to scale. 3. easy to leak: This product is sealed long period, similar to the heat transfer tubes threaded telescopic expansion joints, has the ability to compensate, small heat exchanger thermal stress, difficult to leak. 4. Small footprint: large heat transfer area per unit volume of the product (approximately 1.4 times the optical tube heat exchanger, 1.5 times the spiral plate heat exchanger, corrugated tube heat exchanger 1.7 times the floating coil heat exchanger 2.5 times), the overall heat transfer coefficient, thus reducing large area. 5. Easy installation: The series of heat exchangers and horizontal separation of the two forms facilitates the mounting position. 3 types of heat medium steam - water, water - water heat exchanger