Songjiang acid B network with _ _ B network with Yueda chain network

B network with manufacturers to analyze B network with a maximum temperature of the product is that we can use a common delivery device, commonly made of stainless steel, we all know that stainless steel corrosion resistant high temperature characteristics, so stainless steel B belt can be used at what temperature environment? Under normal circumstances, we believe that when the environmental test does not exceed 400 degrees, the stainless steel mesh belt can work properly. That is the highest temperature of 400 stainless steel mesh belt. However, not all of the stainless steel can reach 400 degrees operating temperature, stainless steel mesh belt at the time of purchase, the seller or vendor will provide a product description, the above will indicate in detail Detailed parameters of material, temperature, and specific To mark this specification as the basis. B network with: how to adjust the tightness of the stainless steel chain we all know that the tightness of the chain to be controlled, too loose will cause the chain to derail, if too tight stainless steel chain is too tight will cause severe tooth plate chain wear, and because contact pressure is increased tooth plate, easy to lengthen the chain, the link plate deformation or pull off the roller chain will thus broken. And stainless steel chains conditioning too tight, can damage the sub-bearing, the rear wheel bearings decrease the number of life. Thus the tightness of stainless steel chains related to the length of lifexqqkj bearing number. About tightness is how we adjust it? We can use for conditioning the wrench 90 degrees each time the ups and downs conditioning; transferred to the appropriate tightness on it, can adhere to excellent agreement, noting that the adjustment should remember the appropriate song number better. Because, in the hours immediately after the axle bolt, will be further than the release of some tight state! In addition, if somewhat too tight, then it ends with a wrench to loosen the bolts conditioning point of view on it, like, 90 degrees is optimal for advanced, after conditioning loose bolts, and try to look at the chain of tightness It is not about the .