Guiyang automatic softener softened water treatment equipment

Automatic softener regeneration process is running and operating an automatic control of ion exchange water softeners use sodium cation exchange resin to remove calcium and magnesium ions in water, reducing raw water hardness, in order to achieve the purpose of softening hard water to avoid carbonates in the pipeline , container, boiler fouling. Significant savings in investment costs while ensuring smooth production. It has been widely used in steam boilers, hot water boilers, heat exchangers, steam condensers, air conditioning, direct gas turbine cycle and other equipment and systems supply water. In addition, as a living water, food, electroplating, pharmaceutical, chemical, printing and dyeing, textile, electronics and other industrial water treatment and desalination systems as pre-processing. After a single-stage or multi-stage production after water softener hardness treatment can be significantly reduced. Works softener softener commonly used [1] technology, there are two, one is the removal of calcium and magnesium ions, reducing the water hardness through ion exchange resins; another nanocrystalline TAC technology, namely Template Asisted Crystallization (Module Helper crystallization), the use of high energy nanocrystals produced, the water free of calcium, magnesium, bicarbonate ions packed into nano-crystals, thereby preventing the free ions to build scale. Soft compared with tap water, there is a sharp taste and feel, soft high oxygen content, low hardness, which can effectively prevent stones, reduce heart, kidney burden, healthy. Key Features 1. High degree of automation, stable water conditions, long life, full automatic, just regular salt, without human intervention. 2. High efficiency, low energy consumption, economical running costs. 3. compact structure, easy operation and maintenance, small footprint, saving investment. 4. Easy to use, installation, commissioning, operation is simple, stable performance control components, allows users to worry about. Workflow work (sometimes called a water production, the same below), backwash, absorption of salt (regeneration), slow rinse (replacement), five quick rinse process. All the different processes are very close to the water softening equipment, but because of the different needs of the actual process or control, there may be some additional processes. Any sodium ion exchange based water softening devices are developed based on this process to five (where automatic water softening equipment will increase the brine re-injection process).