What is the size E27 E27 lamp holder gauge gauge price

E27 gauge how much the price, E27 lamp holder gauge dimensions, E27 gauge parameter E27 lamp holder gauge graphic Product Name: E27 lamp holder gauge standard: GB1483.1-2008; IEC60061-3: 2004 Product use: Use. on the basic parameters of the lamp holder and dimensions for testing. E27 lamp holder gauge 1-gauge 7006-27B-1 2 Regulations 7006-28A-1 3 contact performance only regulation 7006-50-14 against accidental contact gauge 7006-51A-2 5 against accidental contact gauge solder 7006-51-26 height gauge 7006-27C-1 E27 lamp holder gauge 1 7006-25A-2 2-gauge only regulation 7006-26-43 contact performance regulations 7006-21-5 Shenzhen Precision Instrument Co., Bernard professional production and sales test finger stick pin, spring hammer, plug and socket gauge, lamp holder gauge, hot wire tester, needle flame, horizontal and vertical burning tester and other products, while agents: Germany PTL, Germany GMG, Germany FEMTO, Britain MUNRO, USA MONROE, Israel OPHIR, Japan NMB other brands 1. E27 lamp holder through regulation 7006-27B-1 Objective: To examine the threaded cap on the maximum size of finished lamp. Inspection: When the cap is completely screwed finished lamp into the gauge, lamp center contacts should be coplanar or convex surface X X surface. 2. E27 lamp holder only regulation 7006-28A-1 Objective: To test the finished lamp E27 screw cap smallest outer diameter. Test: When the gauge set on the finished lamp (lamp upward) threaded cap, cap not protruding center contact X surface inspection using only gauge of its own weight carried. 3. E27 lamp holder solder height regulations 7006-27C-1 Objective: To test the finished lamp E27 lamp size S1 max and S1min testing: lamp lights when the finished product is fully inserted gauge, W side of the plunger should be coplanar or convex surface with X the X surface, but it should not protrude Y plane. 4. E27 lamp holder contact performance regulations 7006-50-1 Objective: To test the performance of light exposure in the relevant dimensions of the lamp holder. Inspection: If the lamp is inserted gauge, W and V plane surface can be coplanar or bulge V surface, the shape of the lamp may be considered fit and holders are qualified.