Mineral rock density meter sealing wax assay ore ore density porosity tester

Patent Number: ZL201320080171.0 three-year warranty effect: by measuring the density and specific gravity, and able to recognize and identify the characteristics of mineral rocks and applied. Function: simple operation, a quick read, bulk density, wet density, porosity, water absorption, open pore volume, the volume of sealing, 2 total porosity, apparent density and volume of natural, naturally depending on the density and volume, apparent density saturation and Volume 3, powder true density specification: ASTM C39, C128, C127, AASHTOT 84, GB / T23561 standard procedures: 1, the dried sample placed on measuring table, press the M key. 2, the sample was impregnated treated. 3, the sample after the impregnation process is put in the water spider, press the M key. 4, the sample after the impregnation process is put on the measuring table, press the M key to immediately display density; press the F key, you can get wet density, apparent porosity, water absorption, open pore volume, sealing volume, total porosity Model TWD-150Z Test Type: solid, granules, films, the maximum floating body weighing: 150g Weighing accuracy: 0.001g precision density: 0.0001 g / cm3 display value: density, porosity, water absorption temperature, the solution compensation setting: 19.999 solution compensation can be set online interface: RS-232 Advantages: 1, the body of aluminum alloy casting, structural stability. It does not exist because of keystrokes and the impact sensing element to detect, causing instability screen appears. 2, the body is integrally formed, because there is no solution overflow penetrate the circuit board and sensor damage caused problems. 3, the machine's sensors measure the position and the same platform, because there is no corner of the load factors, resulting Deviation measurements. 4, the screen mining elevated independent design and measurement station separation, the panel due to infiltration and adhesions solution, and there is no question of damage. 5, the equipment weight to volume expansion, solution expansion and air buoyancy compensation.