Plastic particle density meter plastic incoming density meter plastic hydrometer

Patent Number: ZL201320080171.0 three-year warranty effect: Confirm plastic chemical composition, crystalline or not, reduce feed costs. Function: to provide corrosion sink, just two steps, quickly read the particle density, volume value, the mixing ratio. Specifications: GB / T1033, T533, ASTMD297, D792, JISK6530, ISO 2781 standard procedures: 1, the sample was placed measuring table, press the M key. 2, the samples were placed in water hanging bar table, press the M key to immediately display density value; press F key to display the volume value. Model TWD-150EP TWD-300EP test types: solid, granular, film, pontoon Weight capacity: 150g 300g weighing precision: 0.001g 0.01g density accuracy: 0.0001 g / cm3 0.001 g / cm3 displays the value: the proportion of the volume, mix than the temperature, solution set of compensation: 19.999 solution compensation can be set online interface: RS-232 Operation screen: http://v.youku.com/v_show/id_XNTc1MjQyODgw.html Advantages: 1, the body of aluminum alloy casting, structural stability. It does not exist because of keystrokes and the impact sensing element to detect, causing instability screen appears. 2, the body is integrally formed, because there is no solution overflow penetrate the circuit board and sensor damage caused problems. 3, the machine's sensors measure the position and the same platform, because there is no corner of the load factors, resulting Deviation measurements. 4, the screen mining elevated independent design and measurement station separation, the panel due to infiltration and adhesions solution, and there is no question of damage. 5, the equipment weight to volume expansion, solution expansion and air buoyancy compensation.