UV analyzer ZF-I

UV analyzer (with box) ZF-I Model: ZF-I instrument Information: ZF-I-type UV analyzer (with box) is the latest successful development of a new generation of analytical instruments. ZF-I-type UV analyzer with high sensitivity, ease of use, in particular the use of wavelength 302NM destructive effect on a smaller sample, is the replacement UV analyzer products, ZF-I-type UV analyzer suitable for DNA, RNA electrophoresis condensate Observation gum samples can detect proteins, nucleotides, etc., in the pharmaceutical industry to check hormone alkaloids, vitamins and other drugs can produce the quality of fluorescence on the TLC analysis, the various isoenzymes, paper layer analysis of observation and analysis photography, PCR technology can serve as a special instrument. Structure: UV analyzer ZF-I type with a group transmits ultraviolet light source for observation, analysis, and photographic. And specially designed box, the user does not require darkroom, you can observe and analyze the samples, with a special camera is mounted on a black box device, equipped with anti-UV glass dark observation room, ultraviolet analyzer ZF-I type leachable more than 95% of ultraviolet rays. UV transmission sub-302nm; and with incandescent lamps. Specifications: 1, Power: AC220V ± 10% 50HZ 2, power transmission: 64W lighting 40W 3, UV transmission filter size: 200 × 150mm UV analyzer for use: (a) analysis of samples was observed electrophoretic good coagulation glue or thin samples, paper samples on the instrument the central layer, open the "reflection of UV light," the power to regulate the height and Stands UV reflection angle, so that the sample fluorescence emitted by the most clear and bright. UV reflection from the sample is usually the more recent, then the stronger fluorescence. (B), samples of photos taken (1) Open the "lighting" incandescent lamp, the use of incandescent lighting, adjust camera height and camera lens imaging the sample clear. In front of the camera mounted on a close-up lap and then color filter PCR. Then close the "lighting" incandescent. (2) Open the UV lamp power transmission, shoot, should determine the different exposure times, depending on the satisfaction of a clear film samples. (C) Note: do not use black - box must be operating in a dark room.