Mine deviation sensor

Mine deviation sensor, deviation sensor manufacturers mine, mine mine price deviation sensor deviation sensor, deviation protection, deviation controller mine deviation sensor for use in mine belt conveyor for detecting delivery the operation of the belt, the situation of the deviation of the belt conveyor belt monitoring "When the belt conveyor belt deviation, coal output deviation sensor low signal protection after a brief delay, cutting conveyor control power to achieve deviation protection, enabling the protection of the belt, extending the life of the belt, cost savings. Action angle 30 ± 3 ° feeler action force: 20 ~ 100N. Reset angle 15 ° probe rotation limit angle of not less than 70 °. The contact resistance of the contact resistance contact closure is not more than 0.1Ω, vibration, shock and after no more than 0.2Ω life test. Works sensor mounted on both sides of the bracket belt, the belt does not touch the normal deviation touch lever, the two terminals of the sensor is not connected; when exposed to belt deviation deviation touch lever and push the feeler deviate from the normal position 30 ° ± 3 °, the two sensor wiring terminals connected. Deviation touch lever automatically returns to 15 ° ± 3 °, the two terminals of the sensor should be disconnected. Mine deviation sensor installation is very simple, just to mount the sensor on a belt on both sides of the bracket, turn on the sensor junction box with cable E (deviation signal), O (power ground). Connected to the conveyor protection host on the apparatus corresponding terminals on it. Contact: shiny landline: 0537-3151263 Phone: 15376502836 QQ; 1545087369 Want: yimei0010 Address: High-tech Zone, Jining City, Shandong Province Electrical and Mechanical Road