FA400 / FA401 line integrated dew point

Internal circuit CS dew point FA 400 / FA401 sensor excluded by temperature variations, dust and drift caused by the aging, thereby providing reliable measurements. Re-calibration cycle is thus extended to two years. The dew point is measured signal output of 4-20 mA. The integrated display shows online dew point measurement values ??and alarm status. By setting, where a siren can be used to activate a relay. FA 400 / FA401 is a complete integrated dew point sensor, display, keyboard and alarm. Buttons are located behind a rubber cover, just open the top cover can be used. Alarms and display features can be set via the button. Sensor parameters such as analogue output scaling, alarm values, units etc, can be easily changed by using CS service kit. This kit is used to connect the sensor to a PC for configuration changes. CS dew point FA 400 / FA401 provide reliable and long term stable dew point monitoring in industrial applications. http://asia.cs-itec.com/wp-content/uploads/2013/04/cs200_2.jpg The newly developed sensor for demanding industrial applications to provide better signal and stability. Applications dew point sensor alarm position adjustment Features Parameters Range FA 400 FA401 dew point -80 ... + 20? C -60 ... + 20? C Relative humidity 0 ... 0 ... 99.9% 99.9% Temperature -30 ... + 70? C -30 ... ??? +70 C Accuracy ± 2 C @ -50 C Pressure range -0.1 ... 5.0 MPa supply 12 ... 30 VDC / 100 mA Ambient temperature -20 ... 50 C Response time 0 ... -40 C:?? 2 minutes to 40 ... 0 C:? 20 seconds Output signal 4 ... 20 mA, 3 wire relay normally closed, 32 VDC, 500 mA connection 2xM12, 5-core PC + ABS housing protection rating IP65 connector G 1/2 "thread (ISO 228/1) UNF 5/8 "thread (optional) transport temperature -10 ... +60? C