WZ-X flashing alarm how fertile plant quality products please choose fertile plant Yangzhou Huai'an

WZ-X flashing alarm Description: WZ-X flash alarm is ATC51 MCU constitute a small computer testing system, to change the traditional leading pure hardware circuit alarm function, which makes no device is greatly reduced, reliability is greatly increased use of optical isolator input circuit so that the CPU and the external circuit to achieve complete isolation. Enter the times are normally open dry input, the alarm using internal buzzer sound and panel indicator flashes and after passive contact output terminals, to achieve the three-state police. This series of instruments uses no device door quality, reasonable structure, superior performance, reliable, long life, easy maintenance, and other characteristics, by the trust of customers. Product Features: 1, eight-contact-type (level type Please specify when ordering) input signal, corresponding to eight lights flashing display 2, the input signal normally open / normally closed Optional (not specified when ordering by normally open factory , normally open, normally closed by jumper setting) 3, with trials and cancellation 4, solid-state LED integrated display technical indicators 1, the power supply voltage: AC220V ± 10% 50HZ or DC 24V ± 10% 2, Ambient temperature: -10 ℃ ~ + 45 ℃ 3, relative humidity: ≤85% 4, input methods: passive contact, does not allow any additional input power of 5, relay contact output: AC240V 3A DC28V 5A 6, the loop resistance is less than or equal to 30 Euro 7, power Consumption: about 5W (eight circuits at the same time the alarm status, not including bell or buzzer power) 8 meter Weight: about 0.5kg Product Selection Table: Description XXS XXG spectrum digital flash flashing alarm alarm Design Number 01?? supply voltage. AC220V ± 10%. 50HZ, relay contact output leads from the terminals can be connected directly with the bell or buzzer 02 XXS01 all functions within the table additional buzzer 03 Supply voltage:?? DC24V ± 10%, the relay contact output leads from the terminals can be connected directly or bell Buzzer 04? Have XXS03 all functions within the table additional buzzer memory types? without memory function A with memory function