Hengshui Brady stainless steel pressure gauge remote YTZ100F

Contact: Sharon phone number: 18832815080 landline number: 0318-8888069 QQ: 2496198254 Product Name: Remote pressure gauge Model: YTZ-100/150 nominal diameter (mm): 100/150 Accuracy class: 1.6 Measuring range ( MPa): 0 ~ 0.16,0 ~ 0.25,0 ~ 0.4,0 ~ 0.6, 0 ~ 0.1,0 ~ 0.4,0 ~ 0.6,0 ~ 1.0,0 ~ 1.6,0 ~ 2.5,0 ~ 4, 0 ~ 6 , 0 to 10, 0 to 16, 0 ~ 25,0 ~ 40,0 ~ 60 ~ 0.06 -0.1, -0.1 to 0.15, -0.1 to 0.3 -0.1 to 0.5 -0.1 to 0.9 -0.1 to 1.5, -0.1 to 2.4 connecting thread: M20 * 1.5 YTZ-100/150 with resistance transmitter pressure gauge for measuring on steel and copper alloys do not corrode liquid, vapor, gas and other media pressure. Set on the second instrument because a slide resistance transmitter remote pressure gauge in the internal resistance, it can be transmitted to the power away from the measured values ??measured in order to achieve centralized monitoring and remote control. In addition, the pressure gauge and to place direct pressure to work on-site inspection. 2, the major technical indicators slide resistance transmitter gauge resistance transmitter wiring diagram Environmental conditions: -40 ~ 70 ℃, relative humidity less than 85%, and a sharp instrument to deal with the pulsating vibration and measured (controlled) media work had no effect. Temperature influence: Temperature deviation from 20 ± 5 ℃, its temperature is an additional error of less than 0.4% / 10 ℃ Accuracy: 1.6 transmitter initial resistance value: 30 ~ 20Ω transmitter full-scale resistance value: 340 ~ 400Ω send Wiring terminals applied voltage is less than 6V structural principle of the resistance Remote pressure gauge consists of a spring-tube pressure gauge and a slide resistance transmitter, and so composed role of resistance Remote pressure gauge mechanical parts and the general pressure meter . Because the resistance transmitter system is provided on the gear mechanism, and therefore, when the gear mechanism in the generation sector shaft deflection, resistance transmitter jib (brush) correspondingly be deflected, as the brush on the resistor slide, making changes in the measured pressure value is converted to a change in the resistance value, and transmitted to the secondary instrument, indicating that a corresponding readings. At the same time, an instrument also indicates the corresponding pressure value. Operating Conditions (1) Ambient temperature: Copper materials: -40 ~ 70 ℃ stainless steel: -40 ~ 200 ℃ (2) Working pressure: static load: with 3/4 scale value alternating load: Use to 2/3 short-term pressure on the measurement limit: use to limit (3) measurement of the relative temperature: