Supply Japan Hioki 3332 single-phase power meter

3332 single-phase power meter can measure very small active and standby to monitor the super sensitive measuring equipment, current 1.0000mA full range, resolution 0.1μA broad measurement range, the maximum can be entered directly Basic 3332 single-phase power meter Parameters wiring single-phase / 2-wire measurements of voltage, current, peak current, active power, apparent power, reactive power, power factor, phase angle, frequency, power accumulation current accumulated voltage measurement range: 15/30/60 / 150/300/600 V AC Current: 1/2/5/10/20/50/100/200/500 mA, 1/2/5/10/20/50 A AC power: 15.000mW ~ 30.000kW ( The combination voltage and current range may be) Frequency: automatic, 500Hz, 100kHz (select voltage or current) input resistance (50/60 Hz) voltage: 2MΩ, current: 2mΩ less (direct input) Basic accuracy ± 0.1% rdg. ± 0.1% fs (active, 45 ~ 66 Hz) display update rate of 5 times / sec frequency characteristic accumulation of 1 Hz ~ 100 kHz measurement range: 5 times / sec measurement range: 0.00000 ~ ± 999999 MAh / MWh, (cumulative time up to 10,000 hours) Current waveform peak measurement (displays the maximum absolute value) Effective input range: the current range of 6 times, or peak 90A of the following D / A output channels: 1ch output: voltage, current, peak current, active / reactive / apparent power, power factor, phase angle, frequency, the cumulative value of the analog output V, A, W while the output / DC ± 5V fs monitor output V, A while the output (waveform output) / 1V rms fs Additional Features Comparison Feature ( Analyzing measurements of any two of the Hi / In / Lo and output), backup, conversion ratio and mean functional interfaces GP-IB / RS-232C standard power supply 100 ~ 240 V AC, 50/60 Hz, Maximum 40VA (100 ~ 120V AC), maximum 50VA (200 ~ 240V AC) the volume and weight of 210 mm width × 100 mm height × 261 mm thick, 2.7kg Accessories Power cord (1) for the EXT I / O connector (1) Manual (1)