Changsha Siemens Temperature Transmitter

SITRANS TH200 supports all common RTD, thermocouple, resistance and millivolt sensors. With the modem and SIPROM T software, its settings quick and easy. User-friendly interface, you can view diagnostic information. Without disconnecting the 4-20mA loop, with a multimeter to read directly the output current. A red / green LED enable users to understand the working condition. Input: RTD sensor Minimum measuring temperature: 10 ℃ resistive sensor Minimum measuring resistance: 5-25Ω minimum detectable temperature thermocouple sensors: 50-100 ℃ mV sensor minimum measurable voltage: 2mV-20mV output: 4 - 20 mA Working temperature: -40 ℃ ... + 85 ℃ specific measurement range, corresponding to the minimum measurement temperature measurement accuracy and other parameters, please consult the characteristics to measure the temperature with a linear output signal indicative of ambient temperature range is available throughout the precision of ambient noise reduction plant influence according to NAMUR sensors 43 open or shorted alarm signal according to DIN EN 61326 and NE21 of electromagnetic compatibility (EMC) Built-in cold junction compensation for thermocouples application accuracy and safety of electrical isolation of single or dual inputs nonstandard sensor applications Custom characteristic curve and the average temperature difference between the temperature measurement US, Canada and Europe explosion protection performance standards rugged design, filling all the advantages of electronic devices: compact easy to install, the central opening so that you can choose any electrical installation you want Isolation multimeter to measure the outlet diagnostic LED (green / red) sensor, open circuit and short circuit detection in EEPROM extended diagnostic capabilities, such as self-testing operation timing characteristic curve configuration information storage EMC According to EN61326 and EN21 Application: SITRANS TH200 change transmitter can be used in any industry. It is compact so that it can be installed on B-type or larger junction box.