Supply Hunan regional Siemens temperature transmitter

SITRANS TH300 with HART protocol supports all common thermocouples, resistance and millivolt sensors. With the SIMATIC PDM or handheld communicator, its settings quick and easy. Unique user-friendly interface, you can view diagnostic information. Without opening the 4-20mA loop, with a multimeter to read directly the output current. A red / green LED for users to understand the working condition. RTD sensor input Minimum measuring temperature: 10 ℃ Minimum measuring resistive sensor resistance: 5-25Ω minimum detectable temperature thermocouple sensors: 50-199 ℃ mV sensor minimum measurable voltage: 2mV-20mV output: 4 - 20 mA, HART Operating temperature: -40 ℃ ... + 85 ℃ specific measurement range, corresponding to the minimum measurement temperature measurement accuracy and other parameters, please consult the characteristics of the measured temperature to provide a linear output signal indicative of ambient temperature range of whole-precision factory ambient noise reduction The impact sensor according to NAMUR 43 open or shorted alarm signal based on DIN EN 61326 and NE21 electromagnetic compatibility (EMC) provides built-in cold junction compensation for thermocouples application accuracy and security of electrical isolation of single or dual inputs nonstandard Custom characteristic curve extended diagnostic sensor applications: for example, the delay timer indicator and set the output current is used to perform the explosion protection standard simulation US, Canada and Europe, rugged design, filling all the advantages of electronic devices: compact easy to install, central opening so that you can choose any installation that you want to isolate the electrical outlet multimeter to measure diagnostic LED (green / red) sensor, open circuit and short circuit detection in EEPROM extended diagnostic capabilities, such as self-testing operation timing configuration information storage characteristic curve in line with EN61326 and EN21 EMC applications: SITRANS TH200 transmitters can be used in any industry. It is compact so that it can be installed on B-type or larger junction box.