Single-phase three-phase power converter switching power 15KW

15KW single-phase three-phase converter turn SDT series single-phase three-phase power transfer, using AC - DC - AC circuit structure, air conditioning use SVPWM vector modulation control algorithm technology, the ordinary single-phase power into three-phase power for industrial use. Three-phase power by SDT series single-phase three-phase power supply turn converted to standard pure sine wave, the phase angle of 120 °, harmonic distortion of less than 2%, fully meet the national three-phase power quality standards, applicable to all types load (eg: motors, machine tools, elevators, commissioning, compressors, etc. three-phase load). SDT series single-phase three-phase power solutions turn in some areas because of the three-phase power to limit the production of electricity to the inconvenience, but also solve some due to space limitations can not apply to user needs three-phase power. Features: 1, the general mains input, eliminating the red tape to apply for three-phase power and a variety of labor costs and a variety of hidden costs, the use of the industrial output of the three-phase power, but by civilian single-phase electric billing, the economy is good 2, dual-mode boot selection function, you can set the step-down start and frequency are two ways to start the LCD settings. This can give full play to the inverter power, no longer have the tape machine, expand the capacity of the inverter when the inductive load, the user cost savings. 3, power supply also has filtered mains disturbances, interference function, is a high performance frequency stabilization power supply, providing a more stable back-end equipment, purer power supply environment 4, the fifth generation of Mitsubishi IPM efficient intelligent modules, highly efficient and stable performance, with a strong protection, short circuit, overload, over temperature protection more secure life of up to 15 more than five, pure sine wave output, it has a good transient response, waveform distortion, reverse hypervariable efficiency, output voltage stability, etc. 6, using frequency isolation transformer, high efficiency inverter, 7 stable performance and high reliability; high stability; high vibration resistance; no noise; pollution 8, using space vector SVPWM algorithms, high conversion efficiency, high instantaneous power and low no-load losses conversion efficiency to 93%. 9, with 485 to facilitate customers remote monitoring, remote switch (optional) 10, the product passed the European CE (EMC and LVD) certification and the Australian Energy Network CEC approved the technical parameters Model SDT-15KW AC input input rated voltage (VAC) Single-phase 220V input rated current (A) 68A AC output rated power output (KW) 15KW output waveform Pure sine wave output rated voltage three-phase four-wire, 380V ± 3% output frequency 50Hz ± 0.05Hz Output rated current (A) 39.4 Power Factor (PF) 0.9 Structure overload 150%, 10 seconds inverter efficiency> 92% peak factor (CF) 3: 1 Display LCD dielectric strength (input and output) 2500Vac, 1 minute Operating temperature and humidity range -15 ~ + 55 ℃ 0 to 90% relative humidity, non-condensing Input undervoltage protection, output overload protection, short circuit protection, thermal protection cooling fan noise <40db

Protection class IP20 (indoor) Altitude ( m) ≤3000 Dimensions (H * W * D) 550x700x1000mm Weight (kg) 160Kg CE standards EN60950-1: 2006 + A11: 2009, EN61000-6-4: 2007 + A1: 2001, EN61000-6-2: 2005, EN61000-3-12: 2005, EN61000-3-11: 2000