Supply 600W solar micro inverter pure sine wave inverter dedicated power grid

Shengyang micro-grid inverter function [System] is applicable to solar panels (two kinds): 24V / 60 片 (Vmp: 26-30V, Voc: 34-38V) 36V / 72 片 (Vmp: 35-39V, Voc : 42-46V) full voltage output (90-260VAC) contains all countries of the world civil grid voltage range, MCU automatic detection and conversion, for all countries. And network use, directly connected to the solar panels do not need to connect the battery MPPT using precise function, APL functions, solar panels automatically adjust to maximum output power, simply connect directly to the solar panel and inverter, no need to connect the battery. AC 0 angle with high precision auto-detection AC phase angle of 0 through isolation amplified input to the MCU for high-precision detection and analysis, the phase shift rate of only <1%, thus achieve high-precision with phase modulation AC output power of merging. Synchronous high-frequency modulation in the process of the grid, usually using the same phase angle and the net, but the product is first rectified AC half cycle of the AC 100HZ, and then the machine produces high frequency current in the circuit and 100HZ of Semi-cycle alternating current generation and close, to achieve high-frequency modulation. Pure sine wave output SPWM directly using pure sine wave output. Automatic sensing function solar luminosity luminosity perception latest computing technology, solar irradiation angle of the solar panel, different light intensities produce different current output, using advanced CPU computing the light of their different degrees, can be directly is displayed on the LCD, you can directly see the sense of the intensity of the sun unit, use more convenient. Power automatically locked (APL) In different current fluctuations in intensity, we should use the MPPT function, when the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, the output power of more stable. Maximum Power Point Tracking (MPPT) at the current intensity, voltage constantly changes, if there is no power point tracking, then there will be a lot of problems, generally used before a solar controller, this product uses high-precision MPPT computing power, automatic and immediate to solar panels output power adjustment in the maximum output point, in order to achieve a stable output purposes. Automatically adapt to different load power factor adapt to any of the power load constant current, constant power This product is constant current, constant output power, without overload, over-current phenomenon. Power automatically turns off the output when a fault mains power outage is faulty, the inverter will automatically shut down output. Current Limit Protection This product is constant current, constant output power, without overload, over-current phenomenon. Stacking multiple machines (parallel multi-machine use) Taiwan machine can be used in parallel to achieve a small power inverter in parallel for the power output. Frequency high conversion rate with high frequency conversion, so that the output of higher efficiency. System Function: directly connected to a DC power supply and direct output power grids, AC 0 angle with high precision and automatically detect and synchronize the high frequency modulation, pure sine wave output for maximum power point tracking (MPPT) and power is automatically locked (APL), and automatically adapt to different load power constant current, constant power, when the grid fault is automatically shut down output (islanding) enables current limit protection, you can stack multiple machines in parallel (line parallel multi-machine use) and high-frequency high conversion rate and net inverse change the application and inverter are widely used in various fields, mainly used for solar power, wind power, battery discharge.