MSW mold pieces / mold called mold pieces

MSW mold piece product advantages: 1, pure natural essential oils extracted from plants, three films jammed state, in line with the EU ROHS environmental protection requirements, its less toxic than table salt resistance. 2, the proven efficacy of sterilization than the market similar products of other strong several times, without any moldy the period. 3, simple to use just paste directly into the shoe box or can, do not add any agents or spray materials, save time and reduce the cost of the packaging process. 4, the product packaging intact within its validity or its thickness defects may also price recovery, in line with standard mold work environment, the need to ensure the protection of its plant protection materials mold pieces (more than six months) clean and free of mold. Mold called mold piece product specifications and instructions: 1, the product packaging is sealed with a foil bag storage, unopened can be stored for more than one year use, specifications for each piece of 5cm × 5cm square and a thickness of 600u, built-in 2010 / bag effective mold space 25cm × 25cm × 15cm, depending on the size of the space is increased in proportion per tablet. 2, each containing 12 volumes, with special mold cartridge, the better, or pasted directly into shoebox after shoebox placed in a large box you can eat 6-7 slices placed on the lower large box, in order to achieve the most Good mildew effect, failure to use MSW finished mold pieces must be sealed as soon as possible, in order to avoid contact with air evaporation. 3, cartridge and Conditions, open the lid mold pieces quickly put in the middle of the entire volume of the bearing, the mold piece band from the side of the box caught notch leads, then cover, pay attention to the sealing lid, using a so-called mold mildew films will mold pieces pulled to tear using MSW mold pieces, do not pull too long, resulting in excessive loss of oil, to ensure the efficacy of the box mold mold piece of MSW.