Tile adhesive

TD-10 ceramic tile adhesive The product is a gray powder, odorless, non-toxic non-corrosive pollution. Suitable for indoor and outdoor and paste all kinds of ceramic tiles floor tiles and the like. Instructions: 1. It must first clear the surface of base oil and other floating dust before construction, so as not to affect the bond strength. 2. Construction of the wall to be moist and maintain a certain flatness, uneven or very rough areas should be leveled with cement mortar and other materials. 3. When using water to tune into a thick paste (water-cement ratio of approximately: 1: 4), stir for 5 --- 10 minutes can be used until the adhesive thickens. 4. Tuned to the adhesive applicator stick in the back of the tile, and then press firmly until the plain so far. 5. This product is used in an amount of about 3-4kg / m, usually due to the different specifications of tile or surface roughness may vary. Note: 1. This product does not apply to paint plastic wood or metal surfaces. 2. Construction temperature should be above 5 ℃. 3. May not outdoor construction when it rains. 4. Coagulation time varies due to various factors (eg, high temperature solidification faster, slower and vice versa), hardening the first time about 6-7 hours to fully harden for about 17 hours. Storage: 1. Composite plastic woven bag, 50kg / bag. 2. Placed on wooden pallets in a dry warehouse.