Stainless steel passivation solution factory outlets

Stainless steel passivation after Anlai US brand stainless steel passivation solution passivation, will generate a very compact, good coverage of the metal surface, firmly adsorbed on the metal surface passivation film, can play to extend the metal Rusty time, the effective protection of the purpose of the metal, the metal more corrosion resistance. The following is Anlai US stainless steel passivation process: stainless steel passivation passivation process is very simple, just soaking liquid at room temperature for 2-3 minutes or more times. After processing time of up to 1200-2000 hours resistant to salt spray process is as follows: degreasing mobile water rinse ---- ---- --- activation of mobile water rinse passivation ---- ---- flowing water ---- ---- rinse and rinse with water flowing through the water ---- ---- Notes drying stainless steel passivation process of packaging: 1 piece stainless steel passivation solution before entering to clean, when the work in the passivation before rust or rust or wax must be in addition to wax. 2 piece must be rinsed before performing any one process clean surfaces can not have on a process of liquid residues. 3 Do not use stainless steel passivation liquid splashed in the eyes or the face, such as inadvertently, immediately rinse with water (skin irritation, but it will stain). 4 passivation groove can be used plastic tank or stainless steel tank, but you can not use cement tanks, cement and makes stainless steel passivation solution. Anley US Chemical Industry: stainless steel pickling, passivation solution of copper, copper chemical polishing fluids, metal anti-embroidered agent protective agent, can provide free samples, proofing, details can call: 15815593420 consultation.