US imports of electronic protective film Yantai treasure trade agent

Protective film for protecting electronic circuit boards and related equipment from the erosion of a bad environment, to improve and extend their service life, ensure the safety and reliability. Electronic protective film coating on the circuit board appearance, forming a layer of light and flexible only 10-25 microns thick film. It can contain chemicals such as: the case (such as fuel, cooling, etc.), vibration, moisture, salt spray, humidity and high temperature protection circuit from damage. Circuit board may be corroded under these conditions, mold growth and produce a short circuit, resulting in an unused protective coating agent circuit failure. Thereby improving the reliability of circuit boards to increase the safety factor, and to ensure its service life. Because electronic protective film contains VpCI ingredients, so it also can take advantage of the absence of VpCI monolayer or difficult to be applied to the site of corrosion protection. Features * Quick-drying (10 minutes to touch, 24 hours filming) * non-conductive, does not change any electrical parameters. * Has properties in addition to wave and transparent film. · Good anti-static function. Long-term anti-corrosion properties. · VCI protection have seal holes and non-porous. · Glow under ultraviolet light, easy-to-do check recommended usage residential and commercial application layer protection agents can provide protection for household appliances in the electronic circuit, so that they can resist: water and detergent (such as: Washing machines and dishwashers ) and high humidity (such as microwave ovens) chemical environment (eg: washer / dryer) offices and homes of hazardous materials (computer) can also be used for industrial purposes, such as navigation equipment navigation systems, radar control system construction method Direct spray metal element surface can be. ? After cleaning the circuit board (or a new board), the component dipped VCI-286 solution, remove the empty dry. Use VCI-286 must maintain the proper concentration of volatile, depending on the size of the seal tightness and spatial space. Its effectiveness in controlling correct more than 24 months. Physical and chemical properties · Colorless · adhesion area 6m2 - 8m2 / L (25 micron thickness) Density 0.87-0.92 K / L · Flash point 62 ℃ (non-powered operation) Packaging and storage · Packaging: 19 l and 208 liter drums and 0.33 liters / cylinder. · Storage: high-temperature storage, to avoid freezing. Sealed packaging can be stored for more than three years.