Vacuum sampler

Operation: 1, the first oil gun to the top of the circle round nut loosen, then tighten the nut through the hose after the fixed oil gun and hose fittings. Hoses should extend oil gun fitting the lower 20cm, in order to avoid oil gun oil gun inside the joint and into the oil pollution. 2,250ml cleaning fluid bottle is screwed onto the oil gun fitting pumping operations can be carried out. Under normal circumstances, the hose extending into a depth of about 50mm. Thus, to avoid inhaling deposits. 3, the oil gun handle to push in the end, while the oil gun handle pulled back, it will create a vacuum inside the oil bottle, the oil flowing into the oil bottle along the hose. Clean 250ml bottle about 15 times repeatedly drawing can be pumped full 250ml sample bottles. 4, the oil pump to the oil bottle 200ml mark, but do not make pumping oil bottles filled with oil. 5, from the oil gun fitting unscrew the oil clean vial, fitted inside the cover, pay attention to avoid the mixing of dust, foreign particles. Then tighten the cap. 6. Loosen the round nut, extracted from the nut of the hose. Clean the hose can not be used repeatedly. 7, received a good sampler that end. Specific details, please call consultation Provincetown Imperial Chinese Service Center! The event interpretation Provincetown Timor Global Chinese Service Center for all! Provincetown emperor, Puluody, Pul, Pull, PLDMC Puluody trademarks registered in China mainland! Related technical description, parameters, monitoring and control services for the exclusive Provincetown Dili, Timor Provincetown reserved for dealers, the user's right to know!