Reiter not allergic resistant metal grinding fluid cleaning lubricants, cooling effect

Reiter resistant metal grinding night (GR-P2) Use a product GR-P2 metal grinding fluid suitable for processing carbide materials, but also for cooling and lubricating the black metal turning, milling and other machining equipment. Reiter resistant metalworking emulsion with excellent lubricity, corrosion resistance, cooling, cleaning, sterilization, can meet business grinders, lathes, saws and other equipment and vehicles, drilling, expansion, grinding, holes and other processing Technical requirements. In addition, anti-Reiter grinding metalworking fluid also has biodegradability, environmental protection, the operation of the workers no adverse stimulus, do not pollute the operating environment. Second, the special nature of the product in all biological materials soybean oil as the base material, without any chemical petroleum feedstocks, the human body without irritation, allergies, heavy metal residues and other hazards. Product is patented technology Henan University of production, the only. The technology is dozens of Henan University Professor of School of foodstuff, Materials Science, Mechanical and Electrical Engineering, Institute of Chemical Technology, abrasive Institute and the Central Laboratory department, etc. After nearly five years of joint development acquired. Products through the practical application of the second machine tool plant in Zhengzhou, Zhengzhou bearing factory, Zheng drilling Group and many other well-known enterprises, have achieved very good results, product performance can be comparable with foreign products, and cost far less than imports products. At the same time, to avoid contamination of the environment, in line with the latest environmental policies in countries of the product with milk flavor, this is because of the raw material, the product does not add any flavor additives cover gas. Third, the good performance characteristics (1) cooling performance. Greatly cutting away heat and sufficient cooling cutting tools, to keep it the hardness and strength. Superior (2) lubrication. In the grinding zone to form the lubricant film, grinding fluid can significantly reduce the consumption of cutting tools and grinding wheels. (3) has good mobility and good cleaning properties. (4) has excellent chemical and thermal stability, and rust resistance. It does not decompose at high temperature, high pressure and air contacts, not bad, not corrode metal surfaces. No rust within two weeks at room temperature workpiece. (5) has excellent stability. When storage and use, no precipitation precipitation is not hierarchical, non-perishable, no interfere with workers' health gases. Meanwhile, the product does not contain harmful sodium nitrite and mineral oil, the working environment is clean, odorless, can be clearly observed when machining the workpiece surface. (6) The new water-based grinding fluid waste very little work, biodegradable, easy to handle, greatly reducing the environmental pollution Fourth, the physical and chemical indicators of quality indicators have reached the GB / T 6144-2010 requirements. Project Quality Indicators Appearance creamy liquid storage stability even qualified translucent transparency defoaming pH 8.0 (mL / 10min) ≤ 1 corrosive gray cast iron A grade A-grade aluminum A-grade copper rust resistance Monolithic A level laminations use 1. A level five recommended concentration 3-15%. 2. prolonged use, wear and tear when cutting the amount of grinding liquid to reach the total amount of fluid 1 / 2-1 / 3, to timely additional liquid or an appropriate concentration of fresh working fluid. 3. Water quality should be used in the preparation of fresh working fluid. VI Notes 1. suggested the use of fresh water quality, in strict accordance with the proportion of preparation of the working fluid. When replenishing the working fluid, should be supplemented with a higher concentration, prevent lubrication, corrosion performance. 2. Keep clean grinding fluid, prohibit mixed metal chips, oil, and other debris; prohibit washing hands with the working fluid, wash rag. 3. After the shutdown, the machine should be on the ground was clean with a dry cloth, preferably oiled rust. The workpiece long term storage, for poor materials, anti-rust treatment is recommended. Environmental performance evaluation results Evaluation Index of new ordinary grinding fluid grinding fluid skin feel to the skin, eyes and nasal irritation no irritation toxicity contain toxic ingredients, non-toxic biological oxygen demand (mg / l) qualified chemical oxygen demand exceeded (mg / l) exceeded qualified