FSL-type mixing drum cooler feng shui

Remove fines and large grain materials back about 70 ℃ semi-finished material on the cooling process through a feed mixing cooler feng shui step to slip through the sieve into the feed tube inside the cooling chamber, the spiral guide plate material is divided into several small parts respectively to the barrel and around the middle of the large cylinder body, the size of the material in the cylindrical body raised by the lifting plate respectively in the inner wall of the cooling air and countercurrent heat exchange is rapidly cooled gradually cooled while being released in the cooling process The water is discharged fans also played the drying effect. While a temperature of about 20 ℃ primary cooling water or cooling water circulating through the rotary joint, the water distributor and the cylinder into the cooling water passages between the cooling water passage disposed within the partition plate functions as the aspect of anti-bias, the cooling water In between the cylinder and the cylinder body material flow countercurrent indirect heat exchange. After cooling, 40 ℃ after drying material around the cavity through the material discharged into the next process. Cooling water through the heat exchanger to warm to 50-60 ℃, the collector and the effluent water discharged into the circulating water rotary joint or as a boiler water recovery systems and other industrial water and make full use of its heat. By exhaust heat from the exhaust fan after lead into the exhaust gas treatment system.