Fertilizer equipment fertilizer equipment manufacturers

Fertilizer dedicated new equipment - ZLP type big grain feed back special vibration chain crusher big grain crusher is one of the key fertilizer production equipment, its operating results have a greater impact on fertilizer continuous and stable operation and appearance of the product quality. The most commonly used large grain crusher models are: chain crusher, three-roll crusher, Cage crusher. However, the above model of large grain crusher are present in varying degrees of wall material viscosity serious, serious wear, high maintenance costs run, crushing effect is not ideal and other defects. Our company based on the above equipment flaws and characteristics of fertilizer raw materials, the development of a new type of large grain crusher, which can effectively solve the above problem. First, the main chain structure ZLP Vibrating crusher and works ZLP-type vibration from the feed chain crusher distributor, cabinet, with a number of groups with high-speed rotor hammer Group chain, motors and elastic shock absorber components. Knot lumps or chunks of raw material back through the feed distributed uniformly into the box, in cabinets and two high speed toward the center of rotation of the distribution chain with several groups hammer hammer rotor chain collision was crushed, crushed The material discharged from the lower discharge mouth gap between the two rotors. Second, the main structural features and technical characteristics of the main structural features ZLP-type vibration chain crusher: 1) Set the inlet distributor, the material evenly distributed. 2) box with steel and high-strength composite structure conveyor. 3) In order to facilitate cleaning and maintenance, set up more than one set Open the door. 4) chain hammer high wear-resistant alloy. 5) the rotor and housing, bearing chamber adopts new seal structure, effective solution to the dust leakage and dust into the bearing chamber body and damage the bearings. 6) set the effective elastic shock absorber lower base group, without a fixed. 7) The flexible coupling between the motor and the rotor pulley instead of Direct Group. Main technical characteristics: 1) the use of an optimized chain hammer group and the high-speed rotor structure, high crushing efficiency, effectively crushing rate of 95%. 2) chain hammer high wear-resistant and impact-resistant alloy bearing sets, equipment long life, low maintenance costs. 3) and is equipped with highly efficient motor is not part of the vibration damper, the box part of the flexible structure, during operation, the housing has been in a state of high-speed vibration, anti-scarred walls with automatic release function, even if there are some sticky wall phenomenon, may also stop cleanup. Three, ZLP-type vibration chain breaking machine models and technical parameters main technical parameters Model ZLP400 ZLP500 ZLP600 ZLP700 ZLP800 ZLP1000 ZLP1200 crushing capacity: t / h 5-8 8-10 10-15 15-20 20-25 25-30 30-50 Feed size: mm ≤100 ≤100 ≤100 ≤100 ≤100 ≤100 ≤100 expected size: mm ≤1㎜ account ≤㎜ accounted for more than 95 percent over ≤1㎜ 95% 95% 95% ≤1㎜ ≤1㎜ more than 95% accounted for ≤1㎜ ≤1㎜ motor power more than 95 percent over 95 percent: Applications kw 2X7.5 2X11 2X15 2X18.5 2X22 2X37 2X55 four, ZLP-type vibration chain crusher that Model vibration chain crusher is the latest development of compound fertilizer large grain crusher can be widely used fertilizer chunk of raw materials, large particles back to materials, and SSP, TSP, MAP and other large pieces of fertilizers and other viscous broken chunks of chemical raw materials, is a traditional chain crusher cage crusher, three-roll crusher replacement products.