Professional aluminum template technology - Liao Ning Jinhan the most economical and most environmentally safe green building aluminum templates

Comparative wood molding and aluminum die one, costing wall wooden template: 1, buy good quality wooden template 20 yuan per square meter, the construction of the wall to reach the national standard vertical 5 draws and 8 mm, can be reused up to eight times, each square closing 2.5 yuan (template section). 2, 5 meters per square meter square wooden formwork, 8 yuan (size 4 * 7) per meter, can be reused up to 20 times, or two million (plus loss of 1 million), combined three yuan per square meter (square wood models) . 3, with 4 meters per square steel template, with four snaps, rent pipe 0.1 yuan per meter per day, rent a snap every 0.05 yuan per day, according to the six-day / layer calculation close 3.6 yuan per square meter (steel, snap lease paragraph). 4, wall wire 1 yuan per square meter, nails, wire, release 3.5 yuan per square meter (nails, releasing funds). 5, the wall up to the national standard labor costs 26 yuan per square meter. Closing 38.6 yuan per square meter of wall, roof wall more than 7 yuan per square meter, 45.6 yuan per square meter roof together, the combined average 42 yuan per square meter (including labor), plus one dollar per square meter corrupted lost fees. A total of 43 yuan / square meter (including labor costs), pure wood molding material costs 17 yuan / square meter. Second, 1, according to floor area of ??1,500 square mold / layer, 33 layers of real estate, template expand space wooden mold, 43 yuan / square × 1500 square / layer × 33 layers, totaling 2.13 million yuan of labor and materials costs template. 2, according to 1500 square feet / floor area calculation template aluminum mold, 1180 yuan / square × 1500 square feet, combined 1.77 million yuan, aluminum die labor costs 23 yuan / square × 1500 square × 33 yuan, or 1.13 million yuan, a total of 2.9 million yuan The use of an aluminum template costs. 1-1, aluminum die-2.9 million - with a wooden mold 2,130,000 = 770,000, aluminum die more than the wooden mold with 770,000, but the remaining value of 1.77 million aluminum die templates second, and the third is only 23 per square meter Yuan labor costs. 23 None / square × 1500 square × 33 layer = 1130000 (second building templates plus labor costs) 2-2, with wooden model 2130000 - aluminum die-1130000 Each first building and then later save 1 million / Dong, aluminum die reusable building 10 floors above 33, can save money 10 million. Promises: Stay recovery, each 300 yuan / square (contract for life preservation). 1500 square × 300 yuan / square = 450,000 (hedging) Third, the summary: If builders only a 33-story building with a wooden mold to spend 2.13 million yuan fee and aluminum die-back mode spend 2.9 million minus 450,000, Real spent 2.4 million yuan cost essentially the same, as long as the second or subsequent use Each can save 100 million. Fourth, the second plaster aluminum template can not achieve the vertical 5 draws and 5 mm standard, after putty can be painted or wallpaper paste decoration. Wood to be the second plaster mold: material costs 6 yuan per square meter (trade mortar), brushed 1.5 yuan per square meter, artificial 12 yuan per square meter. Total 19.5 yuan (secondary plaster expenses), 19.5 yuan / square * 1500 m2 * 33-storey spent 970,000 yuan. The second plaster mold to spend 970,000 yuan wood than aluminum mold. Fifth, according to international standards to ensure acceptance aluminum mold construction schedule 4-5 days / layer wooden mold about 6-7 days / layers, each speed up two days, 33 floors is 66 days, according to the site management fees and development costs 20,000 yuan / day can save 1.32 million yuan. Comprehensively a wooden mold and aluminum die once equal cost, but the remaining 1.77 million worth of aluminum die set, if the second set in the province with more then one million each, are available 10 or more, saving 10 million. Integrated two wooden mold to be the second plaster, aluminum die without the second plaster, can save 970,000 yuan / buildings. Integrated Third, the duration aluminum die standardization integrated wood mold die faster than two months, saving 1320000 / Building. In short: Aluminum die saving: saving wood Environmental protection: no construction waste saves time: standard mold construction period is short and efficient: high building standards, not the second plaster quality: a molding of standard economic weeping, 5 draws and 5: three hundred times repeated use hedge: recycling contract signed 300 yuan / square high social value: improving development efficiency of social quality builders