Absorber corrosion construction method

 1.1 clay is lined with glass flake vinyl ester resin primer, clay surface coating (imported material, thickness 4 mm). Construction process: removing the coating and curing the concrete surface of the original product loose; vinyl ester resin base primer 1 to 2; scratch vinyl ester resin mortar layer 2; vinyl ester resin topcoat 1-2 Road; conservation cure. 1.2 brick panels lining corrosion using imported German or Canadian imports series of bottom paint, clay, brick panels (brick thickness 38 mm). Construction process: the removal of the existing concrete surface coating and curing loose product; even brushing primer; carried out according to a predetermined ratio with clay preparation; brick panels lining. Masonry brick panels on the flat, brick panels are arranged generally laterally continuous seam, longitudinal seam wrong. When masonry brick panels, each paved piece, should be paved with brick panels withstand another line in order to prevent slippage, to be slightly dry clay, it was paved next line. At the bottom of the lining is completed, after the beginning of coagulation clay, you can begin lining the facade. When lining the facade, should be carried out under upward pressure would be generated when the lower brick panels lining the upper brick panels, the lower layer of uncured Qi Hao but clay brick lamellar misplaced or moved. Therefore, when the facade is not continuous lining multilayer lining, usually in two to three layers of continuous lining after pause a moment, and then continue until the initial setting of the lower clay lining; conservation cure. 1.3 overall surface corrosion using a primer liquid, high temperature corrosion special materials, surface coating liquid (coating thickness 3 mm). Construction process: the eradication of the original loose concrete surface coating of sulfide into the concrete places where blowtorch baking, it crystallized, then wash with water to clean the surface of the concrete base; the surface treated grass On the back cover evenly spraying material; After curing the material back cover, with repair materials repair grassroots depression asperities; spray evenly on the mend again back cover materials, the construction of the whole surface after curing; require surface smooth, clean, to meet the design of corrosion thickness; in the overall anti-corrosion surface then spray topcoat 2. Contact: Mr Lu Mobile: 13832638894 Website: www.wantengff.com