Hardware conductive paint

Hardware conductive paint presentation YS-805 is superior production technology Sheng five gold, silver conductive paint, metal conductive coatings, metallic paint conductive paint is made of metal with a very excellent conductivity. Hardware conductive paint component, saving labor, time, convenience, good adhesion, smooth, strong cohesion, no loose particles, can be used for metal, composite materials for the substrate sheet metal, electrolytic galvanized plate. Hardware conductive paint drying paint curing stable performance, high temperature and humidity, do not fall off. With good conductivity and rust-proof function. 1. Product No. YS-805 II. Hardware name five gold, silver conductive paint conductive paint, metal conductive paint, metallic conductive coating, metal conductive paint III. Metal conductive paint Packing 4kg / cans, 5kg / canister IV. Hardware conductive paint Comprehensive Features (1) Color: Silver Bronze (2) Solid content (%): 38 ± 2 (3) Density (g / cm2): 1.1 ± 0.05 (4) Viscosity: 11- 14 s (Tu --4 cup 25 ℃) (5) resistance: less than 2Ω / 10cm (15μm- 20μm dry) (6) Spray Area: 8-12m2 / kg (theoretical) V. metal conductive paint detailed instructions: (1) Spray surface treatment: The substrate must be clean, dry, with alcohol or a special solvent scrubbing equipment surfaces. (2) mixing and dilution: Stir well before use, to ensure that even without precipitation. Normal use without dilution, such as ordinary days that must be diluted with water to dilute to the construction requirements for viscosity, depending on the circumstances, adjust the dilution ratio. (3) Spray: Gun in the form of K-3 (4) spray and physical distance: 10 cm (5) Spray pressure: 0.4 - 0.6mpa (6) discharge amount: 2--4 cycle thickness of 15 - 25μm (7) Operation : Make sure no precipitation before spraying. Subject to suitable coating is applied. (8) Drying: Drying 120 ℃ 15 minutes until dry after cooling the best resistance. (9) suggested spraying: Make sure before you double-cross spray coating without precipitation, every five minutes or so back again. Pressure as possible off a small, slightly larger fuel spraying out of the conductive paint is wet continuous coating. (10) The use, should metal conductive paint to paint the tank completely Stir before using. After Stir silver metal particles are dispersed evenly sprayed out of metal silver copper conductive paint film to achieve conductivity. After the paint is diluted, stirring frequently do best when used not less than 5min. Stirring once, in order to achieve optimum coating achieved after conducting effect. Protective measures: inhalation during use, to ensure that the operating environment well ventilated to avoid direct contact or long-term, do not paint into drains or sewers pollute the environment. (11) spray finished testing, be sure to bring a cloth gloves (or finger cover) detection, so as not to hand perspiration surface contact with the product, an oxidation reaction. Six test conditions and manner: Measurement must be sprayed film is completely cooled to dry. Should be measured with digital display multimeter (DMM stalls should be adjusted to <200Ω), the measured results should remove the meter itself and the resistance of the wire (ie base price) conductivity value side to YS-805 metal silver copper conductive paint. Seven metal conductive paint Storage: sealed and stored in ventilated, dry indoor environment. Eight metal conductive paint Shelf life: in a sealed state, six months / 25 ℃. In case of other technical questions, please call the Priority Sheng radiation conductive paint technology, we will go all out for you to solve.