Construction details and coal tar epoxy primer Description Zhuhai Huafeng preservative

Gum, mica, iron oxide, other corrosion pigments, special additives and active solvents, prepared by the advanced technology of the two-component long-acting anti-corrosion coatings. A primer for the type of paint for the B-type, C-type finish to Foshan Huafeng corrosion Tel: 13902421169 (Liu URL: http://www.0757ff.com First, the composition: the coal tar epoxy bottom two-component epoxy resin lacquer, coal tar pitch, anti-rust paint, solvents curing agent consisting of two characteristics: the coal tar epoxy primer excellent corrosion resistance, rust and strong Third, use: The coal tar epoxy primer applies to oil pipelines, water pipes, cooling water pipes and other wall corrosion, priming using a four, the coal tar epoxy primer Technical requirements:. Q / ZLNQ025-2003 project status indicators in the container is stirred No lumps were homogeneous state after the color and appearance of brown-black paint brush marks slightly matt or semi-gloss sheen Drying time h table dry ≤4, hard work ≤24, full cure 7 days V. The coal tar epoxy primer Construction of reference: 1, the surface to be coated must be dry and clean, no dust oil, and other scale layer 2, substrate temperature to be above the dew point 3 ℃, when the substrate temperature is below 5 ℃, the film hard not cured. not construction. 3, Part A of the full mix, according to the requirements of the Part B ratio, stirring, pour in Part A, stir after standing curing 30min, with matching thinner, adjust the application viscosity.