Water-based paint furniture

Water-based wood varnish water based primer water-based putty water-based paint wood furniture putty white paint white finish hongtai senior water-based wood varnish is through the selection of acrylic, polyurethane, initiator, emulsifiers, additives, cross-linking monomer material, The aqueous phase was modified by the addition polymerization reaction, crosslinking monomers participation in the formation of a stable cross-linked polymer film material at room temperature, an aqueous dispersion emulsion with a high degree of cross-linking and curing at room temperature properties. Film high hardness product forming, high-gloss, adhesion, water resistance, anti-aging, anti-pollution. Complementary products: water-based wood varnish; waterborne transparent primer; water-based furniture paint; waterborne transparent fill soil; water-based putty; waterborne putty; waterborne wood putty repair; waterborne white primer; white water-based paint; water-based varnish. . . Intended use for high-end furniture, export furniture, advanced audio, high-grade wood products, high hardness, high gloss coated decorative work. For tropical, subtropical, warm frigid zones can be applied. Overcoating time: (temperature 23 ± 2 ℃, humidity of 50% ± 5) normal ambient temperature and humidity conditions. 8 hours after brushing two coatings. In case of changes in ambient temperature and humidity, corresponding to extend and shorten the drying time, the same should also be extended or earlier construction of two coat. Surface treatment: painting is required before the sheet surface treated or coated on the surface clean, dry, flat, smooth, can not have any dirt or defects. Primer or putty: special sealing primer or putty coated surface decorations, needed "fill holes treasure" provided by the polished surface or back cover treatment. In addition to high density to be repeated on the back cover, where the wood components, can play once again on the back cover or putty can. Surface finish: The wood lay member putty or back after treatment, need 24 hours to completely dry, except 800 # water sandpaper, polishing, need to use cotton cloth or sheepskin polishing wheel, reach the surface smooth, smooth and bright. Construction conditions: construction should choose sunny, ambient temperature should be in the range of 5-40 ℃, relative humidity of 80% or less preferably, not below 5 ℃ construction, but not at a greater than 80% relative humidity conditions of construction. After the coating film within four hours non-water rinse. In case of a narrow space and wet places construction should increase ventilation, moisture exclusion, to accelerate the drying film. Add Tu paint: This product can be used with any topcoat, but are only allowed to be coated in this product is completely dry conditions. Notes Film thickness: according to different purpose, parts, components, modifications film thickness, but this will change accordingly spreading rate, the amount of dilution, drying time and recoat interval. Film thickness of the normal range of 20 to 60 microns. Packing: This product is printed iron tinplate and plastic drum, specifications for 5kg, 20kg. Product transportation: in transit can not be reversed, damage, collision, avoid sunlight, rain and ice, stacking height of 2 meters or less. Transit temperature should be maintained within the range of 0-40 ℃. The product is water-based, non-toxic, odorless, non-flammable, non-explosive, a "non-dangerous goods rules" Product Storage: The product should exist in a cool ventilated warehouse, stacking height of 2 meters, the ambient temperature 0-30 ℃, humidity It should remain within the 50-85% range. Shelf Life: from the date of shipment from a 12-month validity period, as long as the container over the shelf life of knotless lumps, stir, by testing the technical indicators Without change, can continue to use.