Environmental Stick charring machine, Pingshan Stick charring machine, Snap machinery

How it works: continuous carbonization unit is equipped with: biomass gasification, gas purification, fans, self-made gas burners, charring furnace and other equipment. The machine uses a carbonization way, full use of carbon monoxide, methane, hydrogen and other combustible gases produced in the carbonization process, by pure combustible gas through the flue gas purification system isolated wood tar, wood acid, and then by self-made wind burn combustion device to high temperature carbonization heating pipes (temperature control in about 600 ℃). Internal charring machine has four pipeline from top to bottom, first and second floor of the preheating and drying the pipeline, the third layer is a low-temperature carbonization pipeline, the fourth layer of high-temperature carbonization pipeline. The first and second floor with a separate exhaust pipe exhaust steam main pipe use of materials drying furnace heat, water vapor from the exhaust pipe. Third, the four also has a separate combustible gas recovery line, the material for high-temperature carbonization pipeline charring, the decomposition of carbon monoxide, methane, hydrogen and other combustible gases through recycling pipe, flue gas purification systems, burner for heating pipes, reached cyclical heating carbonization effect. Initial anger charring point source is biomass gasifier supply. The line carbonized charcoal out very good quality. Snap production process energy saving large toner production line: First, the gasifier was ignited combustible material (such as sawdust, straw, wood trim, husk, palm shells, etc.), the flue gas after combustion produced by pipeline into the dust , cooling, cleaning system, after experiencing dust, spray cooling, separation purification process, into a combustible gas, as a pre-carbonization of heat, to form the outer circle. Charring host of heating, the first of charring machine in the first, second inner tube material is heated drying carbonization, third, fourth charring charring tube. Flue host carbonization process generated through the spray, cooling, purification, the flue gas produced by carbonization into combustible gas to the host pipe is formed within the combustion heating cycle, according to the cycle in such a way, the use of heat generated from the body combustion autologous meet environmental energy-saving effect. After this process, the flue gas purification, the production environment is no smoke in the pipeline, has a good environmental protection, fully met the requirement.