Snap mechanical Certified Chenzhou peanut shell peanut shell charring charring machine energy-saving machine

Eucalyptus skin carbonation machine pre-made in the carbonization gas ignited, beginning to heat up, to production of flue gas as a heat source, use of gas by the induced draft fan into the burner, the burner outlet temperatures up to 800 ℃ -1200 ℃, its flow rate may be of 3-5 meters per second, high-temperature air heated at the periphery of carbonation. Per kilogram of raw material to produce three cubic meters of methane gas, these gases for the carbonization temperature, carbonization drying heat source, temperature level but adjustable. Smoking eucalyptus leather Snap carbonation machine not only solve the ordinary smoke generated during the carbonization equipment for Hu environment pollution problems, but also solve the problem of equipment required for the heat source, full of self-reliance done to improve the continuity of the device, economy, make full use of agricultural and forestry residues, such as sawdust, according to bark, rice husk, sludge, shell, palm shell, Stick, tobacco, etc., so that turning waste into treasure, to reduce the supply and demand of China's forestry resources strained contradiction , to make more contributions to the green environment. The line carbonized charcoal out very good quality. Snap production process energy saving large toner production line: First, the gasifier was ignited combustible material (such as sawdust, straw, wood trim, husk, palm shells, etc.), the flue gas after combustion produced by pipeline into the dust , cooling, cleaning system, after experiencing dust, spray cooling, separation purification process, into a combustible gas, as a pre-carbonization of heat, to form the outer circle. Charring host of heating, the first of charring machine in the first, second inner tube material is heated drying carbonization, third, fourth charring charring tube. Flue host carbonization process generated through the spray, cooling, purification, the flue gas produced by carbonization into combustible gas to the host pipe is formed within the combustion heating cycle, according to the cycle in such a way, the use of heat generated from the body combustion autologous meet environmental energy-saving effect. After this process, the flue gas purification, the production environment is no smoke in the pipeline, has a good environmental protection, fully met the requirement.