Metal powder sintered porous material

1. The high temperature at 500 degrees Celsius below normal. 2. Filter high precision, stable pores can effectively remove suspended solids and particulates, high filtering accuracy, good purification effect. 3. permeability, pressure loss is small. Porosity, pore size uniformity, low initial resistance, easy cleaning, line regeneration, easy to clean, regeneration ability, long service life. 4. High mechanical strength, rigidity, plastic, and no external protection framework support simple to install and use, easy maintenance, assembly, and can be welded, bonded and machining. 5. The uniform porosity, is particularly suitable for fluid distribution, the equalization process and other high uniformity requirements occasions. 6. Filter Accuracy: 1 ~ 50μm. 7. No particle shedding, not to dope the formation of secondary pollution. 8. good mechanical properties, low differential pressure, flow, pressure filtration can be filtration, easy to operate. 9. corrosion resistance, and can be stably used in the nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide and other environments. 10. The molding process is good, the overall length of up to 1200 mm without welding. Forming a stainless steel powder products, without cutting, high raw material utilization efficiency, maximize material savings, especially for large-volume, complex structure of the element.