Kluber fully synthetic gear oil KlubersynthEG4460

Hong Kong Kluber Kluberlub BE 41-1501 Details Model Brand Krupp Krupp Kluberlub BE 41-1501 proportion 0.9 Flash Point 260 (℃) 40 ℃ kinematic viscosity of 150 (cSt) Viscosity Index 100 Pour point -40 (℃) Kluber KLUBERPLEX BE 41-1501 performance: high load bearing grease base oil viscosity (ISO VG 1500 mm2 / s) excellent wear resistance contain solid lubricants, in order to ensure lubrication protection in case of emergency does not contain lead and chlorine environment-friendly Klüberlub BE wear characteristics of Klüberlub BE 41-1501 41-1501 at FAG-FE-8 rolling bearing test stand 500 hours test results are as follows: Average: FAG / Schweinfurt for "severe limits grease : <= 35mg 1, FAG test results summary (excerpt), "according to the test results can be used for the following conclusions: Klüberlub BE 41-1501 FAG meet LG12 type of grease lubrication requirements and can be used under heavy load and low-speed rolling bearing vibration (point the contact and line contact), such as load bearing "roller presses and milling equipment broken. BARRIERTA series is the first European to PFPE base oil component of high-quality high-temperature lubricant brand parts lubrication effect can be improved and life is very wide The operating temperature range (up to 260 ° C) when exposed to corrosive chemical media or steam even with sensitive plastic materials have been tested for many years and tested in many industries and types of parts due BARRIERTA series of base oil, to ensure that the long-term stability of a large number of certificates and references support includes four different viscosity grades to meet different application conditions Product description Klüberoil 4 UH 1 N oils are lubricating oils based on polyalphaolefin. Klüberoil 4 UH 1 N oils meet the CLP requirements according to DIN 51517-3. Benefits for your applicationRequirements set forth in DIN 51517-3, CLP are met by viscosity variants ISO VG 68 to 680. Klüberoil 4 UH1 N oils can be used in gearboxes requiring these standards without prior consent by the gearbox OEM if the application notes are observed.Registered as NSF H1 for use in the food-processing and pharmaceutical industries, comply with FDA 21 CFR Sec 178.