Supply monocrystalline polysilicon ingot growth furnace with water-cooled cables

A detailed description of the water-cooled cables: joint use of water-cooled cables and copper wire forming process cold crimping. In this way solid connection, small contact resistance, no damage to copper wire. 8t can withstand more tension between its individual fittings and copper. In order to reduce the loss of water-cooled cables, the cable with a side lead form. Water-cooled electric cable from the side of the lead to make it the shortest length. Water-cooled cable connector with removable structure can be easily disassembled, internal connection with copper wire by cold way. In this way a solid connection, the contact resistance is small. Water-cooled cable jacket tube with cloth rubber tube. This water-cooled cables hose nonflammable, good strength. It can withstand pressure 0.85Mpa without leakage or rupture. Rubber tube after prolonged use will be aging, then we should be replaced. This removable internal structure does not require the destruction of copper wire, but the need to disassemble the bolt on the connector can easily replace the external and internal oblique cone joints are sealed and electrically conductive. When tighten the fitting bolts, it will naturally play a role both conductive and seal. Since the external rubber tube water-cooled cables each time tilting furnace friction with the ground, over time it will be damaged. In this regard, I am in each device is equipped with a water-cooled cable tray, when tilting furnace, the cable is not in direct contact with the ground, thereby extending the life of water-cooled cables.