Tianjin on Tairong laboratory furniture industry fume hoods test rig

Overall structure: the outer enclosure with 1.0mm thick cold rolled steel, the cabinet frame is made of 1.2mm cold rolled steel. Cabinet bottom with a layer of movable partition so layering equipment and other items. The upper and lower parts of the water storage area completely isolated. Steel surface treatment after phosphating spray. Upper cabinets: cabinet upper panel uses 1.0mm thick cold rolled steel plate, the structure of the removable structure, for the electrical, plumbing, lighting installation and maintenance section provides a great convenience, the frame is made of 1.2mm thick high-quality cold-rolled steel production. The upper part of the cabinet interior with full non-metallic structure, with the full guarantee structural strength of the premise, the cabinet no exposed metal parts, in order to avoid corrosion, such as screws, rivets and the like. And a function under makeup air to prevent the negative pressure inside the window is fully closed is too large, fume hood exhaust outlet with manual air volume control valve. Lower cabinet: Base cabinet door using 0.8mm thick cold rolled steel. Structure for the double hollow plate, explosion-proof flame. Base cabinets separator using 0.8mm thick cold rolled steel, load-bearing strength of 150㎏ / m. Deflector: baffles into three removable structure to equalize cabinet wind speed and flow of each part, easier to clean the inside of the cabinet, according to the lab's needs but also on where the location of a second baffle adjustment. Windows: Windows is 5mm adjustable safety (tempered) glass, stepless balanced movements, can hover in any position. Table: the table is 12.7mm thick physiochemical board countertops, recessed design of the table can store a volume of liquid, to prevent harmful spill. Lined plate: lining plate is 5mm thick anti-fold special physical and chemical plate. Faucet: Faucet is a laboratory dedicated single-head single cold water tap. Basin: the basin of polypropylene (PP) forming a basin. Power: The power outlet for the six-hole 10A universal socket. Source: fluorescent light source, and the gas is completely isolated, countertops illumination of not less than 300LUX