k11 high elastic waterproof coating flexible type, price, easy to use, inexpensive

HC-02 high elastic flexible waterproof coating (K11) is a two-component, acrylic polymer-modified cement-based waterproof coating. Liquid material is selected US imports of acrylic polymer synthesis from adding other additives; after mixing cement powder using domestic brand-name and additives, the occurrence of a chemical reaction to form a tough elastic waterproof membrane, the membrane for concrete and mortar Good adhesion can be formed with a solid permanent tight binding prevents water penetration. Implementation of national standards GB / T23445-2009 "polymer cement waterproof coating," a standard feature advantages: 1. Flexible, able to adapt to a certain degree of shock structures and displacement. 2. Strong bond, and is able to loosen the base, shaped parts and precast seams closed. 3. Energy construction in the wet base surface. 4. Directly in the waterproof membrane of cement plastering, paste stone, tiles and so on. 5. With superior waterproof. 6. Environmentally friendly products, can be used for drinking water pool. Adaptation: 1. Indoor and outdoor structures, precast structures, brick and other waterproof. 2. Underground car parks, tunnels, drainage and water supply pipes, floor wall floor roof, swimming pool, water tanks and other water. 3. May appear slight vibration, displacement, building structure cracks surrounding the nozzle, back strip interfaces, etc. waterproof seams or joints. Base surface treatment: 1. The base surface to be solid, clean, smooth, no dust, no oil, no loss, no hollowing, no loosening. 2. Apparent porosity, trachoma must first blocked with cement mortar and smooth, sharp edges should be removed. 3. Before construction, the base surface must be washed thoroughly moist (but not water). Usage: 1. Pour the powder additive, stir 3-5 minutes until the dough no paste-like object, about 1 hour run. 2. Base surface moist with water, the slurry after mixing evenly cross brushing care to avoid leakage of brush, brushing generally requires at least two layers (thickness 1.2mm or more). 3. After the finish layer, you must wait for its slightly dryness, then a second layer. Dosage: According to a flat base surface conditions may be 1. Thickness of 1.0mm ,, about 1.5 ~ 1.7kg / m. 2. Thickness 1.5mm ,, about 1.9 ~ 2.2kg / m. Note: Requires at 5 to 45 degrees Celsius environment Construction: within 48 hours after application, pay attention to prevent rain, strong sun or frost; tools and equipment after use please clean water. Storage: kept in a cool dry place, unopened product shelf life of 12 months. Packaging: 42 kg / set, 20 kg / barrel, 10 kg / barrel, 5 kg / barrel