Color kitchen water Wang, price, easy to use, inexpensive

HC-05 color kitchen water Wang is the company's recently introduced two-component waterproof coating made of advanced production technology. Excellent waterproof performance, simple construction, ideal for home decoration in the kitchen, the bathroom waterproof construction, is the twenty-first century decoration waterproof material representative products. Second, product characteristics: 1. import latex, non-toxic, tasteless, green. 2. in the wet base surface construction, with a certain permeability. 3. The two-component, cold applied; simple construction and maintenance. The colors can be added to form a colored coating. 5. The chemical stability, can effectively block the carbon ions and chloride penetration. 6. The coating tenacity, flexibility, and has excellent durability and weather resistance. Bonding and other kinds of material base surface 7. cement firm. 8. elevation, slope, the top surface of the construction is not flowing. Third, the construction method: 1, the base surface-treated substrate surface should be smooth, solid, clean, no clear water, pH appropriate; apparent porosity, trachoma should be blocked with cement mortar, smooth, sharp edges should be removed; uneven and the need to repair cracks, yin and yang angle arc angle should be made. 2, the construction process can be a roller, brush or scraper to mix slurry was uniformly applied to the base surface, many times should a thin coating. If the base surface is too dry, it must first wetting. Usually two or more are required to brushing. The second layer should be in the beginning of the first layer of dry (not sticky to touch) before brushing, and the direction perpendicular to the previous one, to avoid leakage of brush. The first layer has to be completely dry before the second layer, a small amount of water can be sprayed again before brushing wet. Construction brushing dorsal surface must be at least three times. Nozzle, floor drain, corner range, first should fill level, and strengthen the local water treatment. Before waterproof layer directly paving tile surface or paint brush. Fourth, note: 1, construction temperature should be 5 ℃ -35 ℃, the construction environment must be ventilated. 2, the mixed slurry is preferably within 2 hours, if in the meantime, a good tune unused slurry by mixing evenly, without agglomeration, can continue to use. 3, to test the water test should be two to three days after construction, waterproof layer is completely waterproof detected before proceeding to dryness.