Combined plasma generation system

Product Name combo type plasma generating system Model JYS-C3 Category plasma generation systems >> Overview jet type atmospheric temperature plasma processor by the plasma generator, the composition of the gas transportation system and the plasma nozzle and other parts. Plasma generator to generate high pressure in the high-frequency energy is activated and controlled nozzle pipe in glow discharge plasma generated in a low temperature by means of compressed air plasma sprayed surface, when the surface of the object to be treated plasma encounter, produced chemical and physical changes, the surface has been cleaned, in addition to hydrocarbon type contaminants such as grease, auxiliary additives, etc., depending on the material composition, surface molecular chain structure has been changed. The establishment of a hydroxyl group, a carboxyl radical groups, these groups on a variety of coating materials having adhesion promoting its role in the adhesive and paint application optimized. In the same effect, the application surface plasma treatment can be very thin coating of high surface tension, without any strong action component of other machinery, chemical treatment to increase adhesion. >> Main Features 1. ejected plasma flow is neutral, uncharged, be a variety of polymers, metals, rubber, PCB circuit board materials for surface treatment; 2. increase the adhesive strength of plastic parts, such as PP After material processing may increase several times, most of the plastic parts after treatment can reach 60m dyne surface energy above; 3. the surface properties of the plasma treatment lasting stability and maintaining long time; 4. dry approach to pollution, no waste water , comply with environmental requirements; 5. in the production line can run online processing, without low-pressure vacuum environment, reduce costs; >> Technical parameters Input voltage: AC220V, PE. 50HZ; output power: 600VA X 3 支 Plasma Power Frequency: 20-23kHz Power Control: 190-250V wide range voltage, output power can be prefabricated, adjust the nozzle number: 3 (the number can be customized) air pressure: 0.7 0.8bar (optional PID proportional pressure regulator valve control) air protection pressure: 2bar