Jiahong JH-Y626 dehydration anti-rust oil

A wide range of uses for black and non-ferrous metal surface corrosion treatment of various industries. Second, the characteristics Good dehydration, dense protective film can be improved by the closure of parts of corrosion resistance. Third, use 1. Impregnation method: the clean workpieces immersed in 1-3 minutes out, according to production needs during up and down several times poppet. 2. Brush method: This product can be directly brush or spray in enclosed surface of the workpiece. Fourth, note 1. When using the immersion method, the bottom of the fuel tank must be holder and set the switch and turn on the water level observation window, when the water level is higher than the height of the stand at the bottom of the water should be promptly removed. 2. When using non-heating, pay attention to fire prevention. 3. If the cold weather, in the transport process may produce lumps, then you can slowly heated to 50 ° C slowly dissolve the lumps, and then continue to use, it will not affect the rust.