Supply of two-component polysulfide sealant specifications and pictures

Component polysulfide sealant appearance of fine, uniform paste or viscous, so often referred to as two-component polysulfide sealant, two-component polysulfide sealant and two-component polysulfide sealant is the same product. Component polysulfide sealant to the liquid polysulfide rubber as the main base material, adding a variety of chemical agents at room temperature through a special process is made of synthetic polymer material capable of self-crosslinking curing two-component sealant for metal and concrete and other materials with good adhesion, can be in a continuous stretch, to maintain good air tightness and water resistance vibration and temperature changes, continuous stretching, vibration and temperature changes to maintain good air tightness and water resistance, the and oil resistance, solvent resistance, durability is very good. My company has a two-component polysulfide building materials industry authorities sealant inspection reports. Products into the international market. Implementation of national building materials industry standard: JC483-2006, according to customer demand, the production of two-component polysulfide rubber are two secret (non-sag type, self-leveling). The first non-sagging two-component polysulfide sealant, the appearance of fine, uniform paste or viscous material, suitable for all kinds of concrete buildings Deformation, regardless Deformation buildings are standing seam, sew, or top seams, are applicable, this sulfur seal was applied to the vertical seam sewn on top of a building or later, it does not appear sealant flowing from the construction cracks fall phenomenon, but went directly to the top of the stick, Therefore, non-sagging two-component polysulfide sealant is particularly suitable for building facades or top stitch seam construction, non-sagging two-component polysulfide sealant oil, water, resistant to atmospheric resistance, UV resistance, impact resistance, abrasion , high and low temperature (-50 ℃ -120 ℃) ??non-toxic, non-polluting; is a low modulus, high elongation, suitable for civil engineering, large-scale water conservancy projects, water plants, large sewage treatment plants, water supply and drainage, water conservancy and plug-in boards and other concrete construction projects, a good bonding effect. Deformation have to make expansion and contraction, deformation and shift synchronized action. The second is self-leveling two-component polysulfide sealant, look for the water-like liquid with plastic material, to the water as possible in Deformation flowing, relatively rare, it is only suitable for cement building deformation joint seam with flow resistance, in proportion to the ratio of the well after filling directly into crevices which can flow into the building deformation joint where the plane when the construction of buildings to crack, with self-leveling two-component sealant will time-saving, self-leveling two-component polysulfide sealant oil, water resistance, weathering resistance, UV resistance, impact resistance, abrasion resistance, high temperature (-50 ℃ -120 ℃) ??non-toxic, non-polluting; is a low modulus, high elongation, suitable for ground deformation crack the city's leisure plaza, parking lot, to the deformation joint drainage, airport runways, concrete roads, bottom, underground engineering, hydraulic engineering, civil engineering and other horizontal concrete structures sealed.