Magic ELANTAS V-1380FC ultra-high temperature insulating paint

Magic ELANTAS V-1380FC S level (240 degrees) temperature insulating paint colors: deep amber Viscosity: 25 ℃ 150-300cps Density: 25 ℃ 0.852gm / cc solid content: 47-49% Thinner: T- 6600 Flash Point: 15 ℃ Solution: 13,729,920,593 then strength: 25 degrees 37.2L 125 degrees 5.6Lb dielectric strength: 3600v / mil volume resistance: 23 ℃ 6.58x1014 OHM-CM surface impedance : 23 ℃ 3.64x1013 OHM / SQ thermal conductivity:? 4.85 BTU temperature: 240 ℃ Shelf life: 25 ℃ year (unopened) Surface hardening time: 90 ℃ 6-8 hours or 135 ℃ 25 分钟 Uses: motor, coil , transformers, rotor, stator package: 5GAL, magic ELANTAS V-1380FC solution: 13729920593 workflow: Solutions 13729920593 1 The coil temperature of 100-120 ℃ 2. Pre-cooling to 45 ℃, and then into the groove impregnated varnish impregnated. (To better effect must first impregnated dry vacuum, that is not soaked before varnish 2cmHG evacuated more than five minutes, a little break and the introduction of vacuum to about 30cmHG varnish impregnated coil, and then raise the degree of vacuum to 2cmHG maintained for about 15-20 minutes, then take step 4.) 3. evacuated for 10-15 minutes. The broken vacuum and then soak for 15 minutes. (If required to completely impregnated may be further pressurized 15psig10-15 points.) 5. drip dry 5 minutes 6. Baking 120-135 ℃, 3-5 hours. Solution: 13,729,920,593 company V-1380FC, varnish, insulating paint, quality assurance, welcome to consult the discussion.