Acrylate copolymer emulsion

Supply acrylate copolymer emulsion supply DC-E acrylate copolymer emulsion / acrylic emulsion (referred acrylic emulsion) Description: acrylic emulsion is an aqueous dispersion of polymer, after the addition of the cement mortar (polymer cement mortar \ reinforced mortar cracking impermeability compression \ waterproof mortar \ polyacrylate emulsion cement \ acrylate emulsion cement). The mortar has excellent adhesion, crack, antifreeze, seepage, corrosion, resistance to chloride ion penetration, abrasion resistance, aging properties, suitable for water conservancy, port construction, highways, bridges, metallurgical, chemical, industrial and civil construction and other seepage, corrosion protection of steel surfaces and repair works and reinforced concrete structures. Acrylic emulsion mortar also resistant chemical acid, urea, benzene and other corrosion, has been included in the national "industrial construction corrosion design specifications" GB50046-95 as chemical corrosion-resistant materials. Compared with conventional epoxy resin mortar, acrylic emulsion mortar also demonstrate its superiority, not only low cost, and ease of construction. Acrylic emulsion mortar ordinary mortar similar construction and can be manually applied, but also mechanical spraying, and wet surface for bonding, non-toxic, and the foundation concrete temperature adaptability, resistance to atmospheric aging, life with ordinary cement mortar, to overcome the ring Oxygen mortar often because expansion coefficient greater than the base concrete cracking disadvantage off. First, the product features a good water impermeability effect ◇ ◇ high bond strength, is formed integrally with the structure ◇ strong corrosion resistance, acrylic emulsion mortar to acid, alkali, salt and other chemicals, corrosion ◇ high humidity, aging resistance ◇ good freeze-toxic water-based products, environmental compliance Second, the scope ◇ reinforced concrete structures, defense facilities ◇ waterproof plugging the dam, port handling ◇ impermeable hot tub, landfills, chemical storage, chemical tank and other anti-chemical corrosion ◇ building roads, bridges, tunnels, culverts, concrete repair ◇ industrial and civil roofing, bathrooms, basements anti-leakage process ◇ steel and reinforced concrete waterproofing Third, the construction method ◇ base surface treatment: chiseled old concrete surface erosion layer, rinse, remains substantially clean and solid. Anticorrosive impermeability high when the amount of acrylic emulsion can be increased to 35 to 40, a corresponding reduction in the amount of water. ◇ brushing the surface of the base layer of acrylic emulsion paste, milk propionate ratio of: cement = 1: 1 to 1.5, stir and paste when uncured acrylic emulsion mortar paving. ◇ paving the available mechanical spraying a large area, cell construction. ◇ after construction mortar layer shall conserve seven days. Note ◇ acrylic emulsion mortar construction temperature above 5 ℃ ◇ above grade with 52.5 ordinary portland cement, sand must 2.5mm sieve over a mixing ◇ acrylic emulsion mortar is not too much marinated mortar should be used within 45 minutes Fourth, packaging, storage and transportation of the product ◇ plastic drum: 200kg / barrel, 50KG / barrel; ◇ storage temperature above 0 ℃, valid for 12 months ◇ product is not dangerous to the general cargo transport welcomed the call, Tel please contact 15026956485 Kim