Loctite 272 glue

Loctite glue 272 permanent lock for M36 following thread and sealing. Temperature up to 230 ℃. Locking can be used for cylinder head stud threads. When the air between the threads are isolated, the curing process begins. To prevent loosening and leakage due to shock and vibration. When removing the tools to be heated. Curing characteristics: Loctite glue 272 is 100% reactive anaerobic resin compound, is a one-component liquid thread locking agent, a slight gap between the threads completely fill adjacent. After contact with the bolt threads and cut off the air to solidify into a tough solid to prevent the thread activity. Excess glue out not cure, available cloth to wipe off. The temperature is low or the gap is large, slow Loctite 272 glue curing speed, consider using accelerator Loctite 7649 to accelerate the curing speed. Usage: Loctite 755 thread surface cleaning agent and allow to dry. In threaded engagement at glue, glue width 3-5 Road, thread. Tighten the screw with an ordinary method until the correct position, after 24 hours the highest strength