Glue bags price, how much glue bags

. Woven glue, glue valve bag, brown paper bag glue, glue a snakeskin bag valve bag Our glue Description: Product main ingredients for SBS resin, this product is used for bonding PP or PE valve bags, with the same type, good gluing not drawing, long shelf life, stable quality, waterproof, non-toxic line with SGS standards! Second, our valve bag glue Model: 666A mortar properties: ??? View - transparent sticky ??? pH --5 to 7 degrees ≥1000Mpa shelf --9 months Thinner - thinner dry Film properties: ??? View - transparent softness - high three, valve pockets glue to use: (1) the adhesive surface wipe clean, remove surface residual oil and dirt?. (2) in a dry oil-free liquid adhesive bonding Mianbao. (3) different temperature drying speeds are different, can be 40-50 ℃ bake / 5-6H can. (4) If the glue is too thick can use my company diluent, diluted to a suitable use can (range 10-80% thinner added). Fourth, the valve pockets glue Note: a conditional can be bonded items placed in the oven and bake 40-50 degrees 5-6 hours to reach full dry effect; b unconditional recommendation to use temporary coating. gel method (ie, tools glue stick coated adhesive surface, should not apply thick layer of glue), and do not use glue down method (ie, poured glue stick surface). c, stored in a cool, dry, well-ventilated place. d, Shelf life: 12 months. (Room temperature and sealed packaging intact) e, 2-4 days to reach maximum bonding strength. This product drying time can be adjusted. Fifth, the valve pockets on double-sided adhesive glue methods: Method 1, double-sided glue: Once the surface of semi-dry (ie hand contact adhesive surface is not sticky, about 3-5 minutes), and then painted bonded rubber surface compaction, making close contact. --- The method after lamination adhesive surface, you can reach immediately locate, but the adhesive strength test is recommended after 24 hours. Method 2, a single-sided plastic: the material to be bonded to one side of a thin coating liquid, after the glue, the other side of the adhesive surface and the surface of the adhesive glue, can be used after 24 hours. --- On the method after the glue 5-15 minutes before the initial identification of needs, etc., but more savings with plastic, adhesive strength test is recommended after 24 hours. NOTE: We are at your design and development of special products you need to provide you with the quality and price level green binder, ensures perfect your use, as well as your timely address possible use of technology in the product problems.