Dongguan solid song licensing 868A glue, high-grade super-glue

I. Introduction Model Name Application component traits viscosity 868A adhesive metal, PC, ABS, PVC, light plastic, dumb plastic, bags, paper, and other special graft copolymer yellow 3500MPaS Second, use: (1) the adhesive surface Wipe clean, remove surface residual grease or mold release agent; (2) in a dry oil-free liquid adhesive bonding Mianbao; 1, double-sided glue: Once the surface of semi-dry (ie not to touch the adhesive surface When will sticky, about 3-5 minutes), and then laminating adhesive surface compaction, making close contact. --- The method after lamination adhesive surface, you can reach immediately locate, but the adhesive strength test is recommended after 24 hours. Method 2, a single-sided plastic: the material to be bonded to one side of a thin coating liquid, after the glue, the other side of the adhesive surface and the surface of the adhesive glue, can be used after 24 hours. --- On which glue to wait 1-2 minutes after initial positioning before, but more savings proposal 24 hours later with plastic, adhesive strength test. (3) 2-4 days to reach maximum bonding strength. (4) drying rate is different at different temperatures can be 40-50 ℃ bake / 5-6H can Note: glue too thick, can be diluted with an appropriate amount of added water, the proportion of glue is recommended: dilution water = 10: 1 to 1: 1 Third, pay attention: 1, in order to shorten the drying time, can be used the following methods:. a conditional can be bonded items placed in the oven and bake 40-50 degrees 5-6 hours to reach full dry effect;. b unconditional temporary coating method is recommended (ie, tools glue stick coated adhesive surface, the glue should not be applied too thick), and do not use glue down method (ie, poured glue stick surface). 2, stored in a cool, dry, well-ventilated place. 3, the shelf life of six months.