High transparent AB glue

168A-1 / hardener primary agent 168B-1 168AB-1 Crystal Epoxy epoxy resin, low viscosity, good leveling and good defoaming properties; to room temperature or temperature curing, curing rate is moderate; cured good transparency, high hardness, surface smooth and bright, no bubbles, strong adhesion; cured with good solvent resistance, anti-invasive and anti-yellowing properties. For a variety of metal signs, badges, badges, buttons, crafts and other products on the surface drape and Epoxy; surface mount other hard products; do not apply to flexible or soft products Epoxy. One: Characters Model 168A-1 168B-1 color transparent liquid transparent liquid specific gravity 25 ℃ 1.1g / cm 3 0.95g / cm 3 Viscosity 25 ℃ 4000-6000cps 150-200cps shelf life 25 ℃ 6 months 6 months 2: Use 1, the ratio: A: B = 3: 1 (weight ratio) 2, time: 25 ℃ × 30-60 minutes (mass100g) 3, curing conditions: 55 ℃ -80 ℃ × 60-120 minutes 4, Early dry time: 25 ℃ × 6-8 hours 5, the hardening time: 25 ℃ × 12-16 hour three: After curing characteristics hardness SHORE D 70 ~ 80 bending strength kg / mm2 14 ~ 15 Tensile strength kg / mm2 12 ~ Compressive strength 13 kg / mm2 20 ~ 22 Water absorption 25 ℃% 24 小时 <0.1 Four: Handling Precautions 1, Epoxy products to the surface needs to be dry and clean; Keep work area ventilation; 2, according to the ratio for amount, and the weighing accuracy, please remember that the ratio is the weight rather than volume, A, B agent need stir mixed, to avoid incomplete cure; 3. Stir a timely manner to Glue, and as far as use the time you are finished using the glue has been mixed; 4, curing process, please keep the display level, so as not to spill the glue curing process. 5, the product after mixing can stand for 5 minutes before use to allow mixing in time to get rid of air bubbles generated when; 6, the more mixed the glue, the faster the reaction, the curing speed will be faster, please Note that control the amount of time with plastic, because due to the reaction rate, it will shorten the time you can use; 7, a time: refers to at 25 ℃, 100g mixed viscosity glue after doubling time, not after operational time, the glue should never be used; 8, there are very few people will have prolonged exposure to glue mild skin irritation, mild itching, wearing protective gloves is recommended when using, please stick to the skin wipe with acetone or alcohol, and the use of detergents to clean; 9, before the large-scale use, please small amount of trial skills to master the use of the product, in order to avoid errors. Five: Storage and packaging 1, the product must be sealed and stored in a ventilated, cool, dry place, shelf life of six months, expired after passing the test, you can continue to use; 2, packaging specifications for each group of 40kg, which contains the main agent 30kg / barrel curing agent 10kg / barrel.