Darth supply DS-805A / B transparent epoxy glue hardening

Darth supply DS-805A / B transparent epoxy glue hardening Order Tel 0769-81223675, company official website: http: //www.dasijs.com/ DS-805A / B transparent epoxy glue is cured at room temperature curable ring epoxy resin, epoxy resin and modified amine curing agent, flame retardant two-component room temperature curing products; the job, its good flowability, curing acid, suitable for all kinds of electronic products, insulation seal . DS-805A / B transparent epoxy curing characteristics: 1. Low viscosity, good fluidity, excellent operability process; 2. A, B groups were mixed after a long pot life, easy to operate; 3. Cured with good electrical and mechanical properties; 4. Cured surface gloss, and the shell has excellent adhesion; DS-805A / B transparent epoxy curing technical indicators: the proportion of colorless liquid Appearance colorless transparent viscous 1.10 ± 0.05 1.05 ± 0.05 Viscosity mpa .s (40 ℃) 1800 ± 200 1800 ± 200 DS-805A / B transparent epoxy curing use of technology: blending ratio (weight ratio) A: B = 100: 100 usable time (100g / mixing amount of 25 ℃) 3 ± 1 分钟 curing conditions at room temperature 25 ℃ / 5 分钟 four. DS-805A / B characteristics cured epoxy glue AB: Dielectric strength KV / mm ≥18 hardness SHORE D 80 ± 10 heat distortion temperature ℃ 105 ± 5 volume resistivity ΩNaN 1.0 × 1014 dielectric constant (25 ℃) 3.5 ± 0.5 Water absorption% ≤0.05 DS-805A / B transparent epoxy curing use: A, B two components according to the ratio requirements weighing, mixing evenly adhesive viscosity, liquidity is small, the product. excellent craft operability; A, B groups were mixed after a long pot life, easy to operate; after curing has excellent electrical and mechanical properties. Cured surface gloss, and the shell has excellent adhesion DS-805A / B transparent epoxy glue hardening effect Notes: 1. A, B two components in proportion to strictly weighing, B component too or too little can affect the performance of the cured; 2. A, B groups were mixed after, be sure to stir, so as not to affect the curing effect; 3. A long-term storage component will be a small amount of precipitation, to stir before using; 4. Group B remains sealed after use to prevent moisture absorption and affect the curing effect; 5. work environment should pay attention to ventilation, to avoid the use of materials in contact with the skin; 6. storage according to the basic requirements of the general chemicals: dark, dry, ventilated , storage for six months. 7. 50ML 2KG packaging.