Wide flat sealed anaerobic adhesive 515

Overview Introduction The wide sticky 515 anaerobic adhesive, anaerobic sealant plane anaerobic, general-purpose, flexible tube, fluid resistant performance, non-corrosive. Can form a flexible gasket for machine processing, filling gaps less than 0.25mm of rigid flange. It has a flexible flange allows a small movement at work. Applications with wide sticky 515 in two close fitting metal surfaces, the case of absence of air cured product capable of close fit between the rigid metal surface and the flange joints sealing operation, scalability can adapt their products flange small movements. After the flange assembly, immediately resistant low-voltage characteristics, typical assignments include serving as pumps, thermostats, compressors, power transmitter housing and the shaft cover on-site forming gaskets. The basic parameters of wide sticky 515 has the following performance specifications: Acrylic Chemical Type: Methacrylate Ester Appearance (uncured): opaque, dark purple fluorescence: a fluorescent composition: One component - requires no mixing Viscosity: High Cure: Anaerobic Applications: Sealing Packing: 50ml Tube / 300ml tubes Typical use: Anaerobic flat seal, Universal Model: 515 color: purple fluorescence maximum gap fill: 0.25mm Viscosity (mPa.s): 150000/375000 cure rate ( all solid): 24 hours Recommended accelerator: 7471/7649 Relative density: 1.1 Packing: 50ml Tube | 300 cartridges