Tile classroom knowledge Changzhi Code 03: avoid the tiles for shedding method

Only need to pay attention to the following four aspects in the renovation process: 1, clean up the grass surface before tiling as lime paste, paint, wallpaper and other decorations on the wall, or there is dirt on the ground, must be clean, otherwise cement Mortar and grassroots bond is not strong; in addition, if there are cracks in the wall itself, should be done after proper treatment before tiling, the basic structure of the future in order to avoid cracks larger cause cracking or peeling wall tiles; and, for the flatness or vertical of the large gap between the floor, walls, but also for leveling treated with cement mortar. A comparison shop before tile color differences. Stay tuned for more exciting content to the next phase 2, wall tiles wall tiles due to full immersion in water has a higher moisture content, when you paste it must take into account this feature. Tiles should be well watered before the grass roots moist, otherwise, mortar moisture is rapidly absorbed dry grass and tile and fast condensation will affect the bond fastness. Otherwise, the wall will absorb moisture from the cement, the cement paste can not play the role of agent. 3, first floor tile, paving the ground will not painted cement floor tiles laid on the ground, knocking flat, the grout painted tiles, laying on the ground, four brick diagonal position flush. The order also laid stress. Stickers affixed inside out by brick, such as sloping ground or floor drain, should pay attention to find the slope direction by drainage; paving bricks from the bottom up for aesthetic reasons, the bottom should be affixed after brick. End wall tiles affixed before pressing. In addition, once affixed to the top of a wall can not prevent the tile larger self, causing collapse. Puwan tiles in a short time do not stampede. Stay tuned for more exciting content on tile as much as the next bubble in the summer, because the material is more unusual than dry, so the floor tiles, ceramic tiles and other materials needed by the flood damage treatment, to extend the time to deal with flood damage, making it water close saturation. Thus, when not appearing in the case because the tile adhesive from drying and absorbent cement, which occurred with cement bonding is not strong, thrown hollowing, shedding phenomenon, to bring you some unnecessary trouble. In order to meet the pursuit of fashion consumers, thrown on the market some new technology methods, such as tile adhesives, caulks and colorful, and so on to keep the seam pavement. Tile adhesive (also called dry paste method), ceramic tile without prior soaking wet base surface without basic premise can be good as long as the pavement, make homework conditions have been greatly improved. Stay tuned for more exciting content to the next phase