Supply Soundcraft SOUNDCRAFT Soundcraft mixer LX7-24RW5675

24 Road 4 Group Mixer Mixer: 24 groups mono, 2 stereo, RMS bandwidth of 22Hz to 22kHz linear 4 grouping, stereo + mono output noise measurement of input options to gain zero load 150Ω mixed 24 inputs connected to the mixing fader gain is zero <80dBu fader pulled <90dBu auxiliary input turns 24 at the maximum output <80dBu output directly input to the direct output gain is zero <80dBu input to output directly gain 40dB <70dBu Equivalent noise (EIN) EIN microphone at the maximum gain -129dBu assistance, mix in a maximum <80dBu Crosstalk (1kHz time) typical fader attenuation> 80dBu typical auxiliary attenuation> 70dBu typical audio-visual isolation> 80dBu neighbor channel crosstalk> 80dBu frequency response microphone / line inputs to any output 20kHz <1dBu total harmonic distortion plus noise (THD + N) 1kHz at <0.006% common-mode rejection ratio (CMRR) Typical value (maximum gain) 20Hz to 1kHz <80dB typical (either gain) 50Hz <60dB input and output impedance microphone input 1.8kΩ 10kΩ stereo line input Input 8.6kΩ stereo inputs (unbalanced RCA phono) 12kΩ mixed, assisted, direct output and insert 75kΩ input and output level (LEVEL) microphone input level + 22dBu maximum stereo input maximum level> 30dBu double trace return headset (200 (inch)) 150mW main features: three sizes, 16, 24 and 32 channels GB30 mic preamp and Accurate equalization circuit bus structure of the real 7 Group 2 stereo inputs, 2 stereo returns Channel direct outputs and convenient intercom calls 100mm travel fader (attenuator) four + 48V phantom power switch to select six groups AUX auxiliary group of output, four groups AUX pre-fader or post-fader selectable 18dB / octave high-pass filter steep insertion point can be inserted in the total output or output channel grouping 12 segment LED level monitor PSU built-in power Frequency response: XLR input to any output + 0 / -1dB, 20Hz-20kHz Total harmonic distortion and noise: all measurements in + 10dB and 30dB output gain state XLR input to Direct output <0.007%, 1kHz XLR input to the mixer output lt;? 0.008%, equivalent input noise 1kHz microphone input (EIN): 22hZ-22KhZ bandwidth without weight, -128dBu (150Ω source impedance) Microphone Gain: Minimum: 5dB; maximum: 60dB bus noise: maximum output, input faders - Max, Mix faders 0dB 32 Channel: <- 85dBu; 16 Channel: <- 88dB grouping output, input faders - the largest group faders 0dB 32 Channel: <- 85dB; 16 channels <-88dB auxiliary output, input Fader - the largest auxiliary control 0dB 32 channels: <- 88dB; 16 channels: <- 91dB channel crosstalk between @ 1kHz: Input Channel Mute:> 98dB, the distance between the input fader> 98dB isolation input panning potentiometer :> 82dB; mix routing compartments:> 98dB isolation Routing Group:> 98%; adjacent channel isolation:> 100dB Group - Mixing Crosstalk: <-84dB; aux sends off: <-94dB common mode rejection ratio (CMRR) : mono input, the highest gain in the measurement: typical 80dB @ 1kHz input and output levels: input channel microphone input: Infinity + 15dBu; input channel line input: maximum + 30dBu; stereo input and insert return: Max + 20dBu; full output: Max + 20dBu; general operating level: 0dBu; headset power: 2x250mW, 200 Ω headphones; input and output impedance: Microphone Input 2k Ω; line input:> 10k Ω; Input Channel Insert return: 5k Ω (with input EQ, or worst case 1.8k Ω) mix, marshalling and auxiliary output: 150 Ω; insert send: 75 Ω; Recommended Headphone Impedance: 50-600 Ω; high-pass filter (mono input) : 100Hz, 18dB per octave slope EQ (mono input): HF: 13KhZ, + / - 15dB, 2 order slope characteristics; Hi-Mid: 550Hz-13kHz, + / - 15dB, q = 1; Lo- Mid: 80Hz-1.9kHz, + / - 15dB, 2 order slope characteristics; LED: 6 3 12-segment color LED Light Bar power consumption: AC power supply (internal PSU) 85V-270V, 50Hz-60Hz universal input power : less than 50W Weight: 24 Channel: 21.8Kg; Working conditions: temperature range: -10 ° C - + 30 ° C; relative humidity: 0% --80 Dimensions: 865mm (length) * 503mm (width) * 164mm (High)